FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

Was trying to keep things inline/order, but since rudy67 has now deleted his WTB buddy seat frame thread then he must already be taken care of or stepping out, so truckmanloco you are first up on this just in 67 CST buddy seat with OE center seat cab support brace for $600. as a complete setup plus shipping. Truckmanloco, just as I had posted in that other wtb frame thread, if you only wanted the frame then I will part this bucket seat setup out if there is enough "real" confirmed interest in the seperate pieces as listed below. Mel :chevy:

67/8 GM buddy seat frame. $200.
67/8 GM center console seat $125.
67/8 GM L. & R. seat pair. $200.
67/8 GM LH seat tracks w/lever. $125.
67/8 GM RH seat mount. brkts X 4. $40.
67/8 GM center console clamps x 4. $50.
67/8 GM center seat cab brace. $50.

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

Second in line.

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

i would like to get in line too...!

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

That looks like a really clean truck are you parting it out or just selling the seats ?

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

I'm really diggin' those seat covers. :lol: Nice seat by the way. :chevy:

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

I'll take the brace if it gets to me

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

Mel ill let you know tonight thanks.

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

Please put me in line for the cab brace

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

Are the chrome vent wings available pictured?

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

Truck runs/drives and looks ok from twenty feet or so and is still wearing all of its original paint but body is in rough shape. This one is going to be parted out but I was not planning on doing it here on the board (lots of shipping), was there a specific piece that you were looking for? Mel :chevy:

Here are a few other pics.

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

Last three...

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

In the other wtb thread that I first replied to, were you after the frame alone or a whole buddy seat setup? Listed below is how I see the order of commitment as it sits right now. Mel :chevy:

67/8 GM Complete buddy seat setup: truckmanloco?, 1967sbss, alexr421

If enough commitment and seat ends up being parted out.
67/8 GM buddy seat frame: truckmanloco?
67/8 GM center console seat:
67/8 GM L. & R. seat pair:
67/8 GM LH seat tracks w/lever:
67/8 GM RH seat mount. brkts X 4:
67/8 GM center console clamps x 4:
67/8 GM center seat cab brace: Leroy-B1, mahanian


I have a guy coming over tonight after work to look at the cab and doors, and he specifically asked about the chrome 67 wings. If he passes I will let you know first.

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

Mel- If you are parting, I am interested in the horn cap. Thanks.

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

2nd in line for horn cap

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

I am interested in the seats. How do they look under the covers?

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

Chrome vent wings for me if they are in good shape.

Thanks,
Andrew

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

Mel im gonna pass on the whole seat but if it gets parted ill take the frame still.

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

I just got a set from Frank so you can pass me by.

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

put me in line for the seats.
thanks Lee

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

put me in line for complete seat, and door panels pending $$$

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

shipping to 27107.. thanks, alex

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

The chrome wings went with the loaded doors earlier today, same guy mentioned in earlier post also purchased the titled cab partially stripped.


Yes, I pulled the column and steering wheel out of the cab today. I am going to keep the CST button and matching horn parts together with the wheel, $80. for it all together. Led, you are up first then burb71. Mel :chevy:

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

Thanks for the update guys, it helps keep things moving along smoothly. ;)

This set is alot nicer than most of the original seats (44 yr. old foam) that come in, the pass side as usual is good and firm all around but the drivers seat is a bit soft on the lower bun with possible makeshift/added foam work when they were recovered. Mel :chevy:

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

Mel- Is that a shipped price? If not, what is the total to 92503? Thanks, Scott

Re: FS 67 CST Buddy Bucket Seat Setup and/or Buddy Parts
 

Alex, shipping from Oregon to Zip 27107 residential address comes in at $165., if you could find a business address to use in same Zip cost would then be $145.
71swb4x4, you are 2nd behind alex421.
Lee/angelo 32806, you are 3rd behind 71swb4x4 on the complete seat.
grovmister, you are 4th on the complete seat and the door panels were sold today with the loaded doors.

Listed below is how I see the updated order of commitment as it sits right now, also adding in a local caller thats wanting to look at the center seat should the seat get parted. If 71swb4x4 decides/confirms that he wants the two outer seats, then I will go ahead and break this buddy setup apart in the order as listed below, which is what I had offered up in the first thread. Mel :chevy:

67/8 GM Complete buddy seat setup: alexr421, 71swb4x4, angelo 32806, grovmister

If enough commitment and seat ends up being parted out.

67/8 GM buddy seat frame: truckmanloco
67/8 GM center console seat: Possible local cat
67/8 GM L. & R. seat pair:
67/8 GM LH seat tracks w/lever:
67/8 GM RH seat mount. brkts X 4:
67/8 GM center console clamps x 4:
67/8 GM center seat cab brace: Leroy-B1, mahanian, 2000tj