1967 Suburban Part Out
 

Near complete, minus motor, 67 C10 Suburban getting ready to part out. Is titled and registered till June 2012. Most parts are available. Original straight 6 with a manual 4 speed on the floor. It is a complete roller, with rust issues in the lower rear quarter panels and some other bubbling in normal places, roof is nice. Would like to work inside out so it does not sit too muck like a carcass, because of where I have it parked. Will list a few parts and we can go from there if there is something else you may be interested please ask....here on the post only...please do not PM for anything as per forum rules ALL PRICES PLUS SHIPPING.

Adam
951-544-0721

Steering Column (non tilt) $60.00
Heater Controls $20.00
Glove Box Door Complete $20.00
Hi Hump Manual - $45.00

http://i163.photobucket.com/albums/t...r/IMAG0267.jpg

http://i163.photobucket.com/albums/t...r/IMAG0268.jpg

http://i163.photobucket.com/albums/t...r/IMAG0271.jpg

http://i163.photobucket.com/albums/t...r/IMAG0270.jpg

http://i163.photobucket.com/albums/t...r/IMAG0269.jpg

http://i163.photobucket.com/albums/t...r/IMAG0272.jpg

http://i163.photobucket.com/albums/t...r/IMAG0273.jpg

http://i163.photobucket.com/albums/t...r/IMAG0274.jpg

http://i163.photobucket.com/albums/t...r/IMAG0287.jpg

http://i163.photobucket.com/albums/t...r/IMAG0288.jpg

http://i163.photobucket.com/albums/t...r/IMAG0289.jpg

http://i163.photobucket.com/albums/t...r/IMAG0295.jpg

http://i163.photobucket.com/albums/t...r/IMAG0296.jpg

http://i163.photobucket.com/albums/t...r/IMAG0297.jpg

http://i163.photobucket.com/albums/t...r/IMAG0212.jpg

http://i163.photobucket.com/albums/t...r/IMAG0215.jpg

http://i163.photobucket.com/albums/t...r/IMAG0208.jpg

http://i163.photobucket.com/albums/t...r/IMAG0207.jpg

http://i163.photobucket.com/albums/t...r/IMAG0286.jpg

http://i163.photobucket.com/albums/t...r/IMAG0281.jpg

http://i163.photobucket.com/albums/t...r/IMAG0280.jpg

http://i163.photobucket.com/albums/t...r/IMAG0283.jpg

http://i163.photobucket.com/albums/t...r/IMAG0294.jpg

http://i163.photobucket.com/albums/t...r/IMAG0298.jpg

Re: 1967 Suburban Part Out
 

I will take the heater controls provided they are in good condition. How much to ship them to Brookings, SD 57006?

Edit: Is the top lever missing on the heater controls?

Re: 1967 Suburban Part Out
 

Interested in steering wheel pending comment on condition, pics and price shipped to 28678. Thanks in advance.

Re: 1967 Suburban Part Out
 

I want the entire headliner with hardware!

Re: 1967 Suburban Part Out
 

Bowtie seatbelts to 80516?

Re: 1967 Suburban Part Out
 

Adam, door handle and window cranks to 66512. Thanks Randy

Re: 1967 Suburban Part Out
 

CHEVROLET tailgate emblem if in good condition? Will you be cutting any patch panels later?

Re: 1967 Suburban Part Out
 

Interested in rear hatch if rust free?
Outside mirrors with backing plates?
To 82210

Re: 1967 Suburban Part Out
 

Next in line on the CHEVROLET tailgate emblem please.Is the dash pad in good shape?I also need the headliner above the drivers seat.Thanks:chevy:

Re: 1967 Suburban Part Out
 

Also need all door locks and tailgate lock with keys if you have them.Thanks:chevy:

Re: 1967 Suburban Part Out
 

Could you put me in line for spare tire bracket and headliner (actually only need rear panel) + hardware?

Re: 1967 Suburban Part Out
 

Hoping to get to her a little tomorrow morning, darn holiday weekends!!

Re: 1967 Suburban Part Out
 

I'm in need of a rust free dent free hood, is this one good?

Re: 1967 Suburban Part Out
 

please put me next in line for the rear hatch pending pics...thanks.

Also, what condition are the CHEVROLET hood letters, shipping to 79908.

thanks again.....


and let me know if you will be cutting any panels... need Quarters if they are rust free.

Re: 1967 Suburban Part Out
 

what kind of shape is the rear bumper in behind the hitch, plate etc. ??? thanks

Re: 1967 Suburban Part Out
 

I would like all the plastic bolt hole plugs. How many do you have? Shipped to 95660. Thanks, Dave

Re: 1967 Suburban Part Out
 

I have to ask...Why are you parting this out?
DINK

Re: 1967 Suburban Part Out
 

If you have the column/wheel, can you check shipping (www.shipgreyhound.com) to 98901
Thanks- fourspeed

Re: 1967 Suburban Part Out
 

I would be interested in the glovebox door and all the windowcrank and inside door handle escusions. Thanks

John

Re: 1967 Suburban Part Out
 

Any word on this Budnikguy?The locks also please?

Re: 1967 Suburban Part Out
 

Don't know how long his holiday weekends last. Mine sure ain't that long.

Re: 1967 Suburban Part Out
 

in need of the passengers side door strike plate, shipped to 97333 Oregon

thanks

Re: 1967 Suburban Part Out
 

Haha..quite the opposite, I only get one day a week to play with trucks, and that is Monday....so the 4th messed that day up and the previous Monday I committed to the family...but i am on it today! I work 6 days a week at my business ...

Re: 1967 Suburban Part Out
 

lol...at least your mondays aren't like mine..i have to go deal with an asshole sergeant major!!

anyhow,, any word on that rear hatch? i'm next if rockc passes, let me know...

text 253-495-0880

thanks!

Re: 1967 Suburban Part Out
 

Would like to be put in line for the steering wheel depending on the condition, price, shipped to 54401. Thanks.