PARTING 72 GMC 2wd longbed leaf lowered truck
 

Just got it today...fresh parts truck

so it can be used up of all its fine aged parts. :metal:

72 GMC 8 foot bed ,markers have been filled..nice floor..$300

P/S pump with pulley and bracket $65 shipped for (small block)

Auto crossmember $55 shipped

GMC grille decent $150 plus shipping

Auto column non tilt $125 shipped

GMC fenders $50 each plus shipping.

72 leaf spring rear $100 local pickup 37745 zip (3.08 ratio) I will pull cover to check it.

front disc brakes setup $100 complete

front springs and heated with torch...not the way to do it..lol

rear leafs and dearched with tall rear hangers..$100 plus shipping on rear leafs and shackels.

More pics to come as i will be taking it apart this weekend.

I will have A/C parts off it as well.. The cab and doors are not for sale.

Attachment 779486

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

Interested in Passenger Front Fender and Tires and Wheels pending condition, pics and shipping.

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

Ok..I will have better pics over the weekend.

i will pull the fender..what is your zip for a shipping quote? Thanks,Erick

..The wheels are off a 1989 chevy stock wheels...just with trim rings and spinners..

tires are shot..sorry...the trim rings and centers $40 shipped for all 8 parts

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

zip is 30533
Pics of rings and center caps would be super.

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

I will get pics of all..thanks...

I bought it for the cab...my rollback is rusted above the windshield and my pass. door wont open without a fight...its a 69 cab and has lots of rust issues thanks to road salt in the winter..

This cab is almost perfect...a few minor fixes needed.....cab and doors i am going to use..rest will be parted out.



If you need anything that may be there..just ask me

I have the exhaust manifolds..$75 shipped for the pair..nice

350 motor stands $30 shipped..

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

I might be interested in the a/c stuff. Do you have a price for all of it by chance? Thanks Ryan.

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

Interested in front bumper with bolts and the two center bumper brackets that attach to the frame. Also both mirrors with all brackets and screws. Might be able to arrange for someone to pick up parts. If you want to do a shipping quote it would be to 53403. Thank you!--Cory--

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

Put me 2nd inline for the rings and centers if missinfishin passes.

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

I never got a chance today to get it off the rollback yet..I will have it down off it tomorrow and will post more pics..and start taking stuff off it.

The front bumper does have a small bend it the top right above the frame rail..I think it can be straighted easy.

The a/c i will see what all is left on it..I am going a different route for my a/c

Has factory a/c without gauges..was a 350 th350 truck

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

Interested in rear lamp wiring from frame to lamps pending condition. Also bed braces from bed floor to bed sides.

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

Thanks for the info on the bumper. I'll pass on it but still interested in the side mirrors with brackets. My contact in nashville wont be able to pick up the parts so I'll need a quote for shipping to 53403. Thanks again.

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

Interested in both front fenders. 2nd in line behind "missinfishin10" for the passenger side fender

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

the 4 trim rings are nice..the 4 spinners do have some minor pitting on all 4 of them..

the fenders do have the lower moulding holes filled..passenger side has some rust in the front outer heel you can see it in the pics.

I will be pulling it apart over this weekend if you want more pics after they are off..I understand..and it no problem at all.

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

I am going to keep the mirrors on the doors i am going to use those.

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

the rear harness is all cut up with trailer wires everywhere..sorry..

The bed braces are going with the bed. its a nice bed..

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

Interested in rear spring hangers pending pics!!

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

the spring hangers ,not the shackles right?

front rear hangers or all of them?

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

I'll take the rings and spinners at $40.00 shipped. I would like more pics of the fender please.... when you can.

Thanks!

Jeff

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

the hangers are all good shape..truck sat for about a year with no motor in it.

Attachment 780365

Attachment 780366

Attachment 780367

Attachment 780368

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

I'll bet it doesn't have a sway bar... does it? How about a tailgate?

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

I will be in fletcher nc below asheville monday morning..i dont know if a could meet you there somewhere..I will be in my rollback..got to pick up a car..

I will get it off here this weekend..so we can see the inside..

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

no tailgate...

no swaybar..

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

Thanks for the pics, I'll pass on the spring hangers tho.

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

I got it unloaded today...now just waiting for the bees to settle down before i start knocking it apart..lol

ants,bees...i took there home..now they have to go somewhere..else..

More pics to come later on..when it cools down some.

No problem on hangers..someone might need the gmc leaf frame.

Re: PARTING 72 GMC 2wd longbed leaf lowered truck
 

What kind of shape is the under hood, engine, AC wiring harness including everything from the firewall out? You mentioned Trailer wiring... does it have a bolt on hitch?