The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=12)
-   -   How the heck do you get a fender off? (https://67-72chevytrucks.com/vboard/showthread.php?t=477673)

eightyfive 08-02-2011 04:57 PM

How the heck do you get a fender off?
 
Passenger side, i found the two bolts at the top, and a few more inside the wheel well.
Do i have to take the grille off? and how many bolts should i have by the time im done?
I need this done today, so the help would be greatly appreciated!

Thanks

benoit454 08-02-2011 06:02 PM

Re: How the heck do you get a fender off?
 
2 inside the door jamb, and 1 or 2 in there behind the grille, might be able to remove the lower filler on the PS the body color piece that fills in below the fender down to the bumper, and get in there to get them out.

There are a few in the inner wheel well i think, not sure on how many. Then the two you found are the inner top ones, one at the radiator support and 1 at the hood hinge area, you also have to remove the hood hinge part that has the spring on it.

eightyfive 08-02-2011 10:47 PM

Re: How the heck do you get a fender off?
 
GOT ER! thanks a ton :)

benoit454 08-03-2011 07:48 AM

Re: How the heck do you get a fender off?
 
did ya have to remove the grille?

eightyfive 08-04-2011 02:12 AM

Re: How the heck do you get a fender off?
 
Yes, just for one or two ignorant bolts. its not that hard tho, ive done it before


All times are GMT -4. The time now is 10:13 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com