3:40 12 bolt axle
 

Anyone interested in a 1973-81 3:40 ratio 12 bolt axle ?
Or in 1976 disc brake 2wd complete front suspension assembly ?
asking 50 bucks for axle or front assembly, no where to store them right now.

------------------
Randy, Lincoln-IL
r72k5@hotmail.com

Looking for an HEI 292/250ci dizzy
Current fleet:

-`77 Buick Electra boat car, 403ci/TH350, 8-track AM/FM, tilt-cruise, climate control, p/seats, p/w p/l, p/antenna, running it til I kill it

-72 K-5 Blazer 4x4 chassis, to be converted to a 1968 4x2 street pickup
-'76 GMC Sierra Classic, 350ci/TH350, 3.40 gears,
- '68 C-30 dually dump, 292ci/4 speed, 7200lb Corp- 4:57 gears

Hopeful to add to corral soon:
-'68 Panel Delivery(Many thanks to Shanet)!
250/3 speed, 3:73 ratio

'68's forever!!!! http://communities.msn.com/RandyR72K5

http://www2.state.il.us/state/facts/geograph.htm




[This message has been edited by Fast68Chevy (edited 08-29-2001).]

I was just getting ready to list my 6 Cyl. Hei on the 67-72 board where i sold the Other 2 I had for sale. The one i have now is the type with the seperate coil but it is there also with mounts.still has decent HEi wires in it with cap and holdown. $39. I 'll knock off $10 if you still have that 73-80 clock you had and want to trade it . lemme know before i throw it on the board. Do you have the ability to truck freight that rear or are you only looking for pickup?
all4trux@snip.net . DAVE

frieght is lots of $$$$, like over 200 bucks for this, plus building crate, etc.
I do have the clock if you want it.
if you know what color wires run the clock, I can test it for you, let it run for a day and make sure it keeps correct time, etc.

leme know, as I can use the dizzy, even if its not an in cap style, just as long as HEI http://67-72chevytrucks.com/board/ubbhtml/smile.gif

I E-mailed you.

------------------
Randy, Lincoln-IL
r72k5@hotmail.com

Looking for an HEI 292/250ci dizzy
Current fleet:

-`77 Buick Electra boat car, 403ci/TH350, 8-track AM/FM, tilt-cruise, climate control, p/seats, p/w p/l, p/antenna, running it til I kill it

-72 K-5 Blazer 4x4 chassis, to be converted to a 1968 4x2 street pickup
-'76 GMC Sierra Classic, 350ci/TH350, 3.40 gears,
- '68 C-30 dually dump, 292ci/4 speed, 7200lb Corp- 4:57 gears

Hopeful to add to corral soon:
-'68 Panel Delivery(Many thanks to Shanet)!
250/3 speed, 3:73 ratio

'68's forever!!!! http://communities.msn.com/RandyR72K5

http://www2.state.il.us/state/facts/geograph.htm




[This message has been edited by Fast68Chevy (edited 08-30-2001).]

crossy, does the dizzy have a 4- 5/8" long shaft, from the bottom of the base-to-engine block seat, to the end of the shaft ? And does it have 13 teeth on the driven gear?

sending a pic & info, DAVE