1967 GMC Bed, LWB, and leaf frame
 

For sale the attached photo shows the bed. Its in good to decent driver shape with some scale rust in bed. Sides are great condition and with it being the 67 no marker lights.


Bed and whats left of frame only or come get the bed I dont mind one way or the other.

1) bed 200.00
2) bed and frame 250.00

Make an offer. If not sold it becomes a bed trailer and I scrap it sometime down the line after fillint fulll of steel.


I will say that the front RH wheel does not roll, the frame is going to be cut to remove the VIN as I used the cab elsewheree, and the driveshaft, transmission and front bumeper will not be included.

OK SO basicaly just the bed is all you are looking at plus the ability to make one heck of a truck trailer bed using a leaf sprung rear end. [

Shown by appointment only located north of College station, TX.

Thanks,
Reply here in thread.

Thanks, again....

Re: 1967 GMC Bed, LWB, and leaf frame
 

UPDATE= by the end of september I will have made the frame into a truck bed trailer. At that time depending on how I like it I may keep it or fill it full of scrap and drop it at the salvage yard.

Thanks...


I'm selling out of all my parts vehicles and keep ing only what I know I need.

Make an offer...

Re: 1967 GMC Bed, LWB, and leaf frame
 

ill give ya 100.00 bucks for the bed. i really only need the sides of the bed. what ya think?

Re: 1967 GMC Bed, LWB, and leaf frame
 

does this have a dana 44 rear diff? if so and you end up srapping it would you sell the rear drums and some brake parts off it?

Re: 1967 GMC Bed, LWB, and leaf frame
 

150 and you can take the whole bed or cut the bed sides off what ever you want to do.


SHe is obviously still attached to frame so come ready to help pull. I have a trip planed to the farm next weekend.

Re: 1967 GMC Bed, LWB, and leaf frame
 

I wouldnt know how to tell what rear end it has in it. Its six lug and set up for leaf springs... Not really interested in parting it out to the nut and bolt level but if it is it and is something rare I think I could help out.

What it boils down to is time... I dont have the time to travel to the location adn pull a ton of parts its not worth the time and return on the investment at this point. But again tellme how to figure out what it is and I'll see if I can tell.

Should the other guy take the bed I'll see what I can do.

Thanks,

Thomas

Re: 1967 GMC Bed, LWB, and leaf frame
 

where is the truck located at? when would be a good time for you?

Re: 1967 GMC Bed, LWB, and leaf frame
 

just north of college station and either saturday or sunday next weekend. Otherwise it will not be until sepetember before I get there again your assistance will be needed to disconnect and pull bed. unless you bring a sawzall and a long extension cord.

Re: 1967 GMC Bed, LWB, and leaf frame
 

as long as they are all metal and no filler in them, ill take it. so we are both clear, it is not this coming weekend but the next, correct?

Re: 1967 GMC Bed, LWB, and leaf frame
 

this is what the rear diff cover will look like and the drums. the drums will have a offset of 1/2 inch rather than the 12 bolt's flat drums. i also need the e-brake seperator bar. Rod.

Re: 1967 GMC Bed, LWB, and leaf frame
 

thanks I'll check it out. He committed to the bed, I've sent more photos and pending his inspection I guess its sold.

Re: 1967 GMC Bed, LWB, and leaf frame
 

I send you several photos but have not heard back if you are interested in comeing out to look on the weekend of hte 13th. Please let me know so I can make plans to meet with you. I've got farm work to do in the morning so it would unfortunatly have to be during he heat of the day but I do have a barn we can put it in to remove bed or bed sides.

I will check next weekend and get back to you on what i find.

Re: 1967 GMC Bed, LWB, and leaf frame
 

Bed and parts no longer for sale, I've started scrapping and will make this into a bed trailer to tow behind my 67 GMC Stepper.

Thanks,
THomas