Measuring for Frame Squareness
 

I have always just assumed that my frame was good and straight I have never had a body on the frame for as long as I have owned it.

Can anyone tell me where and what measurements I should take to see if it is indeed a good square frame? I'd really hate to put in all this work only to find out after paint that I bought a screwed up frame.

Re: Measuring for Frame Squareness
 

Like to know this also.

Re: Measuring for Frame Squareness
 

If you have a factory assembly manual, there's a page in there showing measurements....

Re: Measuring for Frame Squareness
 

would also like to know this

Re: Measuring for Frame Squareness
 

if it's a bare frame you can take a tape and measure corner to corner in an "X" pattern ... should be within 1/8"-1/4"

Re: Measuring for Frame Squareness
 

Thank ya much, it is a bare frame. I'll check that out later. I also believe I have a factory manual somewhere if I can find it I will post those measurements up as well for the other folks.

Re: Measuring for Frame Squareness
 

here is a couple pics that might help..

Re: Measuring for Frame Squareness
 

This should help you out.

Re: Measuring for Frame Squareness
 

thanks kcsa75....those are the ones I was talking about...the CA10700 is the swb, and the CA10900 is the lwb frame:D

Re: Measuring for Frame Squareness
 

You guys are awesome, I know what I am doing when I get home tonight.

Re: Measuring for Frame Squareness
 

nice guys i wanted too look at this too!