The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Need plans(specs) for a bed lifter (https://67-72chevytrucks.com/vboard/showthread.php?t=48004)

crossy 04-08-2003 03:45 PM

Need plans(specs) for a bed lifter
 
I need plans, blue prints or just specifics on the device the body shops BUY to lift truck beds with a mobile crane . I will settle for a good picture of a store bought or Holmes made one . I'm sure I can figure it out because I fabricated for a living once,and built my own engine testing stand. I just thought I would save myself some math. got any good pictures of what worked for you at home without a bed lifter. I always work alone or with just one 9 year old helper so it needs to be mechanical. thanx , DAVE

rage'nrat638 04-08-2003 11:15 PM

peice of cake
 
all you do....is cut two 2x4's the inside width of you bed ......
turn them 1 1/2" side up ..for max strength...drill two holes ...
one in each end..big enough for your favorite heavy duty rope
tie any way you want at board....so wont come out....(big knot)
or loop...cut rope so ends wiil be even in center...after loops are tied....hook to comealong from rafter....do same for rear....lift...
roll truck from under ...drive truck from under.....sit on h.d. saw horse's......do your thing......no room in garage ..raise back up
pull truck back in....leave bed up in air...close door ...go see momma
:D :D boy i sure wish i could just draw a picture, its easy, modify
a will.thats how i did mine...crawled inside the bed every think on horse's.....buy some good steel ones from home depot...or favorite hardware store.......MARK i love you man:flag:

79GMC454C35 04-09-2003 12:47 AM

I went the expensive way. I invited 3 friends over for a beer. 4 guys can lift the bed off very easly. However, those same 4 guys can drink a lot of beer. Dont break out the beer until the bed is off, this will help prevent any dents & broken feet. :flag:

Ol' Grey 04-09-2003 12:17 PM

I use a forklift and some rope ;) Just tie the end of the bed to the load cage on the lift and go at it.

Low87 04-09-2003 12:54 PM

Quote:

Originally posted by 79GMC454C35
4 guys can lift the bed off very easly.
WUSS! :D Everytime I lift my bed off it's just me and another guy at the wheel wells. Not fun, especially since this last time was within the confines of my 2 car garage (more like 1.5 car).

swervin ervin 04-09-2003 02:36 PM

Quote:

Originally posted by Low87


WUSS! :D Everytime I lift my bed off it's just me and another guy at the wheel wells. Not fun, especially since this last time was within the confines of my 2 car garage (more like 1.5 car).

Yeah, me and my 15 year old son lifted mine off this past weekend.

Low87 04-09-2003 03:15 PM

Quote:

Originally posted by swervin ervin


Yeah, me and my 15 year old son lifted mine off this past weekend.

See, even a geriatric and an adolescent can do it by themselves! :eek:

BigRed 04-09-2003 03:26 PM

Quote:

Originally posted by Low87


See, even a geriatric and an adolescent can do it by themselves! :eek:

Oh, now that's just wrong! But true :D

crossy 04-09-2003 03:55 PM

well a forklift is a dream
as fara sa geriatric goes . I have a few on swervin I think? my only son aint old enough for that yet tthough. and the wife says no mas. DAVE


All times are GMT -4. The time now is 01:54 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com