The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)
-   -   CA WTB 1963 Longbed C10 OEM Parts (https://67-72chevytrucks.com/vboard/showthread.php?t=483110)

sighlurr 09-06-2011 12:39 AM

WTB 1963 Longbed C10 OEM Parts
 
3 Attachment(s)
I just picked up a '63 longbed that needs a little help with some OEM parts. Please send me a PM, or text or call 925 979.8161 and let me know what you have. Shipping will be to 94596 and I prefer PayPal.

1. Drivers door top trim piece. Looking for something to match the original molding; I do not want new. I need a driver condition OEM piece.

2. Passenger longbed upper trim piece. Same as above - driver condition.

3. Uncut original radio panel. Previous owner installed an aftermarket CD player, so I need to weld in an original section of the dash. I need to have the complete recessed rectangle as shown.

4. Cab sails, custom cab panels. Driver condition and need the 1960-1963, not the '64+.

5. Pair of black sub visors. Please no rips or tears..

Thanks!

64 1964 65 1965 66 1966 1960 61 1961 62 1962 1963

Slow Build 09-06-2011 04:59 PM

Re: WTB 1963 Longbed C10 OEM Parts
 
2 Attachment(s)
This one is in a dismantler yard in Brentwood. I'll check the trim pieces tomorrow if you'ld like. I take it your looking for straight but weathered trim. I also have some sail panels should work for you. Let me look into it and I'll get back to you.

sighlurr 09-06-2011 06:39 PM

Re: WTB 1963 Longbed C10 OEM Parts
 
That's great - thanks for your help!

It's about time you and I meet up in person anyways...


Quote:

Originally Posted by Slow Build (Post 4885086)
This one is in a dismantler yard in Brentwood. I'll check the trim pieces tomorrow if you'ld like. I take it your looking for straight but weathered trim. I also have some sail panels should work for you. Let me look into it and I'll get back to you.

Posted via Mobile Device

Slow Build 09-07-2011 05:14 PM

Re: WTB 1963 Longbed C10 OEM Parts
 
3 Attachment(s)
All the door trim was shot. Good passenger side upper bed trim ( a few very small dings). I also have the 60-63 custom sail panels (could use a good cleaning). I'd like $80 for the three pieces. Get back to me if that works for you.

sighlurr 09-07-2011 05:20 PM

Re: WTB 1963 Longbed C10 OEM Parts
 
Quote:

Originally Posted by Slow Build (Post 4887039)
All the door trim was shot. Good passenger side upper bed trim ( a few very small dings). I also have the 60-63 custom sail panels (could use a good cleaning). I'd like $80 for the three pieces. Get back to me if that works for you.

I like it. There isn't any rust on the sail panels, right? I think it's just a reflection in the picture.

PM me your paypal and I'll get you the money today, or I can drop off cash when I come through your area this Sunday, 9/11.

Thanks for your help!
-Devin

Slow Build 09-07-2011 11:23 PM

Re: WTB 1963 Longbed C10 OEM Parts
 
4 Attachment(s)
I took them outside for better light. No rust on the front, a little surface rust on the back, some of that transfer from the metal strip that holds the back of the sails down. One has some sap or something of that sort on the back.

sighlurr 09-07-2011 11:42 PM

Re: WTB 1963 Longbed C10 OEM Parts
 
Quote:

Originally Posted by Slow Build (Post 4887748)
I took them outside for better light. No rust on the front, a little surface rust on the back, some of that transfer from the metal strip that holds the back of the sails down. One has some sap or something of that sort on the back.

Looks good to me.

You around this Sunday?
Posted via Mobile Device

Slow Build 09-08-2011 12:29 AM

Re: WTB 1963 Longbed C10 OEM Parts
 
PM sent.

sighlurr 09-08-2011 01:38 AM

Re: WTB 1963 Longbed C10 OEM Parts
 
Slow Build took care of me on the sail panels and bed trim.

I still need the door trim and a radio section that's clean (original, uncut holes) from the dash...

Thanks guys!

old chevy truck 09-08-2011 02:44 AM

Re: WTB 1963 Longbed C10 OEM Parts
 
I have a wide door peace for $ 20 i can send you a pic of it tommarrow

sighlurr 09-08-2011 03:51 AM

Re: WTB 1963 Longbed C10 OEM Parts
 
Yes, if it's the top trim piece - please do.

Quote:

Originally Posted by old chevy truck (Post 4888029)
I have a wide door peace for $ 20 i can send you a pic of it tommarrow

Posted via Mobile Device

old chevy truck 09-08-2011 12:42 PM

Re: WTB 1963 Longbed C10 OEM Parts
 
can you send me your e-mail so i can send you a pic thanks. randy66chevy@yahoo.com

sighlurr 09-08-2011 12:57 PM

Re: WTB 1963 Longbed C10 OEM Parts
 
Just emailed you...

Quote:

Originally Posted by old chevy truck (Post 4888506)
can you send me your e-mail so i can send you a pic thanks. randy66chevy@yahoo.com


sighlurr 09-09-2011 01:57 AM

Re: WTB 1963 Longbed C10 OEM Parts
 
I have everything now but the dash section.

Does anyone feel like breaking out their Sawsall?

old chevy truck 09-09-2011 02:05 AM

Re: WTB 1963 Longbed C10 OEM Parts
 
ya i would if you had a 64-66 chevy i have one . Imay know where to find one .i will let you know tommarrow .

sighlurr 09-09-2011 03:25 PM

Re: WTB 1963 Longbed C10 OEM Parts
 
Thanks for meeting up today Rich (Slow Build)! Sorry I was running late.

Slow Build 09-09-2011 11:39 PM

Re: WTB 1963 Longbed C10 OEM Parts
 
Quote:

Originally Posted by dsigh (Post 4890466)
Sorry I was running late.

No worries. I got there about 2 minutes before you pulled up.
It was good to meet you.

Bugeyev8 09-13-2011 02:15 AM

Re: WTB 1963 Longbed C10 OEM Parts
 
I have the factory radio to fill the hole in the dash !! local too !


All times are GMT -4. The time now is 04:29 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com