The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - pic needed (https://67-72chevytrucks.com/vboard/showthread.php?t=483285)

cr34t3d_by_d4rkd3n

09-07-2011 02:51 AM

pic needed

can someone please show me how the calliper is on the spindle showing the brakelines stock bolting to the caliper. itd be apperciated!!

lilpoindexter

09-07-2011 08:11 PM

Re: pic needed

1 Attachment(s)

I don't have a picture of stock, but I ran my lines under the spindle. I saw how you did yours on top of the ball joint in another thread. It seems like if you run them that way, the line could snag on the ball joint bolts or some thing.

cr34t3d_by_d4rkd3n

09-07-2011 11:29 PM

Re: pic needed

i notice u have the same lines as me... are ur caliper ends straight or bent like stock? .. i need to see the banjo bolt view... do u have any of those pics?..i think i have my calipers mixed up.. the lines are not happy goin stock, thru spindle way... any help is appreciated!

cr34t3d_by_d4rkd3n

09-07-2011 11:31 PM

Re: pic needed

1 Attachment(s)

and yes i agree. my routing is bad. its super tight at full lock, full lock.

78 Chevyrado

09-08-2011 08:39 AM

Re: pic needed

Here's the stock routing

http://i160.photobucket.com/albums/t...f/dcp_3623.jpg
http://i160.photobucket.com/albums/t...f/dcp_3629.jpg

http://i160.photobucket.com/albums/t...f/GEDC0040.jpg

cr34t3d_by_d4rkd3n

09-10-2011 11:26 PM

Re: pic needed

perfect! thank u sir. my lines are not bent at the banjo...crap. oh well now i know. you helped me alot thankyou!

All times are GMT -4. The time now is 11:11 AM.