The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - NP 435 swap. Anyone done it? (https://67-72chevytrucks.com/vboard/showthread.php?t=483832)

Rodent

09-10-2011 11:15 PM

NP 435 swap. Anyone done it?

I've was given a good working order NP 435 4-speed out of a '72 F350. I'm going to try to get it to bolt up to the bellhousing, and order the correct adapter for the bearing retainer and such.

My truck is a 292 3-speed column shift 1/2 ton coil sprung truck. Just wondering if anyone else has done the swap? My main concerns are where the shifter will come through the floor and if I'll have to lengthen/shorten the driveshaft or change yokes?

Scot_Douglas

09-11-2011 10:35 AM

Re: NP 435 swap. Anyone done it?

Your truck is a good candidate for an S10 T-5 swap. :)

All times are GMT -4. The time now is 12:44 PM.