Rear custom four link pics!
 

I wanna see what some of yall have done/seen. Lets see em!:metal:

Re: Rear custom four link pics!
 

Don't know how custom it is but this is one i put under the '51 suburban. It's from TCI

Re: Rear custom four link pics!
 

Heres a picture of the rear setup on my 50.

http://i8.photobucket.com/albums/a1/...y/DSC_0332.jpg

Re: Rear custom four link pics!
 

I would like to see a close up of the front arm bracket and length of the arm, Thanks

Re: Rear custom four link pics!
 

I just pulled the TCI four liunk out of my 57 and fab up new front mounts.I think that the front mount hang way to low. will try to get some pic

Re: Rear custom four link pics!
 

Is that a watt's linkage in the rear? it looks like there is something between the shocks

Re: Rear custom four link pics!
 

Those are sick guys!

Re: Rear custom four link pics!
 

LOL, Is that good?

Re: Rear custom four link pics!
 

Not the best pics but here are a few of mine.
Kim

Re: Rear custom four link pics!
 

great work guys - kim your truck rocks!

Re: Rear custom four link pics!
 

Here's what my unfinished parallel 4 link/ watt's link looks like.

Re: Rear custom four link pics!
 

HRRookie why exactly are you mounting the 4-link outside the frame rails? Are you not planning to mount a wide set of tires out back? Only you and Kim57 have real 4-links of the street variety.

Re: Rear custom four link pics!
 

i like the watts linkage. looks nice.

Re: Rear custom four link pics!
 

Thanks.
Kim

Re: Rear custom four link pics!
 

Here is what we have concocted, tell me what you think, if yall see strength's or weakness's in doing it this way.

Re: Rear custom four link pics!
 

You got it. I considered running a huge tire but I won't be making enough power to justify it. On top of that, I didn;t have to take out the crossmember where thr front brackets mount.

Re: Rear custom four link pics!
 

nice welding.

Re: Rear custom four link pics!
 

The upper or lowers? The lower is the stock S10 leaf spring perch, don't remember how long the lowers I wanna say around 35". I am 1500 miles from the truck right now or I would go measure.

Nope just a fancy shock mount.

http://i8.photobucket.com/albums/a1/...g?t=1292996220

Re: Rear custom four link pics!
 

again let me say you guys do great work !

Re: Rear custom four link pics!
 

Studio Jak,
I see a problem with the panhard rod being on top of the axle. The panhard rod needs to be in the middle of the arc that the axle panhard rod mount will scribe in motion. In other words, at the top of the arc, the panhard rod will be centered, at the bottom of th arc it will pull the axle to the right.
If the panhard rod was mounted on the axle centerline, it would have maybe 6-7 inches of up and down movement without appreciably pulling the axle to one side.

Re: Rear custom four link pics!
 

I agree with this..

Re: Rear custom four link pics!
 

here is a few pictures of my 4 bar setup.with the new c-notch had to make new front mount because the old mount were to low.and now with the rearend in have to make up new mounts for the coil overs and the panhard bar.

Re: Rear custom four link pics!
 

Here's what i came up with.;)

Re: Rear custom four link pics!
 

Coupeguy2001, Parkwood,

I was wondering if it was going to give me trouble. thank you for the response.

Parkwood, I like your panhard being diagonal across the fourlink. Who makes that??
Is is as sturdy as it seams?? Thats a real clean setup you have going :)

Re: Rear custom four link pics!
 

It's made by TCI. you're over 90% there with the set up you have now.. just get rid of the pan hard bar over the top like you have and install the bar across the bottom like i have.. Give TCI a call and you might be able to buy just the bar with the bolts and joints you need to make it fit your set up.. measure across from back to front just in case their bar is longer and they can make it to fit..
It is sturdy and easy to adjust and stays out of the way of the exhaust too.. you need the phone number let me know..wayne