The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   85 cab wiring questions. (https://67-72chevytrucks.com/vboard/showthread.php?t=485342)

jasons 09-20-2011 05:18 PM

85 cab wiring questions.
 
I replaced the cab and front clip on my 74 with ones from an 85.

The steering column was hacked and a push button was installed for the starter. I replaced the column with a good one and everything works as it should, but the neutral safety switch is bypassed and I can't find where the wires for it have been spliced together. Where do these wires enter the under dash harness, or where do they go?

The horn also does not work. Where should the horn relay be located?

Wincks2 09-20-2011 07:30 PM

Re: 85 cab wiring questions.
 
Hi

I'm a novice so this could be wrong, but you might look at thing shown in the fourth photo in this post. http://67-72chevytrucks.com/vboard/s...15&postcount=3

I can tell you the poster of the photo and text didn't know what he was talking about because it was me.

In my case it wasn't the relay. It was a simple fuse in the fuse box.

Posted via Mobile Device
Posted via Mobile Device

jasons 09-20-2011 10:29 PM

Re: 85 cab wiring questions.
 
I have the horn problem figured out. The turn signal cancelling cam is broke where it holds the wire for the horn button.


All times are GMT -4. The time now is 05:55 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com