Parting 68 GMC Panel, patch panels
 

Parting this panel out. Very little rust. Will be cutting this up and using part of the quarters to patch a bed I have, and the wheel wells.

Core support is not rusted out, is GMC but can be converted to chevy. $140
Drivers fender has some damage in the lower front corner, passanger side has a nut missing for the hood hinges. $50 each
Grill is kinda toasted. $30
Inner fenders, awesome shape. $140 for the pair. Pass side is not rusted.
http://pnkages.com/gallery/d/10021-2/IMAG0020.jpg
http://pnkages.com/gallery/d/10012-2/IMAG0029.jpg
Barn doors, complete, hinges, glass $200
http://pnkages.com/gallery/d/10015-2/IMAG0030.jpg
hood $200
http://pnkages.com/gallery/d/10039-2/IMAG0035.jpg
http://pnkages.com/gallery/d/10051-2/DSC00667.JPG

Anything else just ask. If you are looking for patches try to give me a picture of what you are looking for.

Re: Parting 68 GMC Panel, patch panels
 

Do you have both of the door strips above the door panel? If so, how much to 94579? Thanks

Re: Parting 68 GMC Panel, patch panels
 

How about the gas neck area?

Re: Parting 68 GMC Panel, patch panels
 

I have several sets. Are you looking for good stainless ones? Or good paintable ones?

Missing the filler neck, but your after the sheet metal?

Re: Parting 68 GMC Panel, patch panels
 

paintable is fine
Posted via Mobile Device

Re: Parting 68 GMC Panel, patch panels
 

Looking for both, but will take what I can get.

Re: Parting 68 GMC Panel, patch panels
 

Ok let me get pics for both of you tonight.

Re: Parting 68 GMC Panel, patch panels
 

I'm interested in a cargo strip. Just one. it could be taped to a furring strip and shipped. Thanks

John

Re: Parting 68 GMC Panel, patch panels
 

Id like to sell stuff like that as a complete set. Otherwise its harder to sell the others with one missing. Id like to get them out and make sure they are not trashed. Id do $30 plus shipping for them all.

Re: Parting 68 GMC Panel, patch panels
 

I have a few,
http://pnkages.com/gallery/d/10154-2/IMAG0089.jpg


Inside, dent towards bottom
http://pnkages.com/gallery/d/10145-2/IMAG0085.jpg
http://pnkages.com/gallery/d/10148-2/IMAG0086.jpg
http://pnkages.com/gallery/d/10151-2/IMAG0087.jpg

Re: Parting 68 GMC Panel, patch panels
 

Looks fine to me. How much? 37188

Re: Parting 68 GMC Panel, patch panels
 

Are the cargo strips that bolt to the walls available as well or were they removed when the windows were installed? Thanks. I'll take the set of floor strips pending shipping to 20901 Thanks

John

Re: Parting 68 GMC Panel, patch panels
 

tail light section on the drivers side from door opening to gas filler ares bottom of window down. please send pictures of under side of the corner and undrside of quarter panel. If you have a chance pm with a phone number and i will explain what i am looking for.

Re: Parting 68 GMC Panel, patch panels
 

How big of an area do you need? Are you patching one up or adding it to something?

I think they are gone. Let me check tomorrow.

Sending a pm

Re: Parting 68 GMC Panel, patch panels
 

hows the hood pin assembly? pic? what about shipping to texas on the inner fenders?

Re: Parting 68 GMC Panel, patch panels
 

the top set looks like they.ll work. How much to 94579?
Posted via Mobile Device

Re: Parting 68 GMC Panel, patch panels
 

The pin assembly is staying on the hood for now, but I might have another. Ill have to look in my parts bin.

Shipping those fenders...hmm..any ideas on what carrier you would like?



$20

Re: Parting 68 GMC Panel, patch panels
 

fed ex or greyhound??

Re: Parting 68 GMC Panel, patch panels
 

this picture of your other burb part out has this picture looks like a smaller piece but the same idea. i just want to go farther toward the gas filler and and up the post just a little bit more. i am wanting the drivers side.


http://67-72chevytrucks.com/vboard/s...2&postcount=29

Re: Parting 68 GMC Panel, patch panels
 

I.ll take them. Pm me your info and I.ll get to it tomorrow.
Posted via Mobile Device

Re: Parting 68 GMC Panel, patch panels
 

Heres the parts for you guys. Do either of you need them smaller?
5150-yours is 10" wide, bottom to the bottom of the window.
DINS 1-yours is from his cut all the way back. Someone foamed a bunch of the crevasses, dunno if this is going to be an issue or not. Also noticed some damage where the bumper was.
http://pnkages.com/gallery/d/10160-2/IMAG0092.jpg
http://pnkages.com/gallery/d/10163-2/IMAG0093.jpg
http://pnkages.com/gallery/d/10166-2/IMAG0094.jpg
The foam behind the tail light
http://pnkages.com/gallery/d/10169-2/IMAG0095.jpg

Let me figure out ups price. Thats who I use and they pick up from my work.

You have a pm

Re: Parting 68 GMC Panel, patch panels
 

Lets do shipping and crating at $50, plus the parts $30, $80 total. Pretty much thinking about doing what you had said and nail them to some wood, but Id incase it somewhat. Ill update with a pic.

http://pnkages.com/gallery/d/10181-2/IMAG0102.jpg
http://pnkages.com/gallery/d/10184-2/IMAG0103.jpg
http://pnkages.com/gallery/d/10187-2/IMAG0104.jpg

Re: Parting 68 GMC Panel, patch panels
 

This is getting a little to pricy for me. Sorry to have put you to any bother. I have to pass.

Re: Parting 68 GMC Panel, patch panels
 

How mutch for the barn doors and grill top bar? Shipped via Greyhound. Are they rust free? WES

Re: Parting 68 GMC Panel, patch panels
 

Payment sent. Thanks