The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)

- - Does anyone make this part for an AD? (https://67-72chevytrucks.com/vboard/showthread.php?t=487623)

not2oldchevy

10-05-2011 06:45 PM

Does anyone make this part for an AD?

I need the little metal piece that holds the cab seal on the floor right next to the step. It is about an inch wide and runs the length of the step and is held on with small screws. On an AD. Thanks

parkwood

10-05-2011 07:39 PM

Re: Does anyone make this part for an AD?

Quote:

Originally Posted by not2oldchevy (Post 4936934)

I need the little metal piece that holds the cab seal on the floor right next to the step. It is about an inch wide and runs the length of the step and is held on with small screws. On an AD. Thanks

Try this place. www.truckandcarshop.com or www.brotherstrucks.com

T Hilde

10-06-2011 01:24 AM

Re: Does anyone make this part for an AD?

This thing?

http://www.classicparts.com/1947-54-...ctinfo/56-061/

coralhead

10-06-2011 06:43 AM

Re: Does anyone make this part for an AD?

if you are doing a rebuild you need to get catalogs from brothers, jim carter, classic, LMC, and truckandcarshop. Put them in the bathroom and you will know all the parts you need and who has them.

not2oldchevy

10-06-2011 07:15 PM

Re: Does anyone make this part for an AD?

T Hilde That's it thanks a lot!

All times are GMT -4. The time now is 01:48 AM.