The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   E Brake help! (https://67-72chevytrucks.com/vboard/showthread.php?t=487833)

KroAutomotiveInc 10-07-2011 12:05 AM

E Brake help!
 
:gmc2:
where can you find e brakes for these truck ive bought the ones from Napa/checker and there not even close i couldn't even figure out away to make them work anyone know? or had luck with the ones at the parts store

Captainfab 10-07-2011 12:39 AM

Re: E Brake help!
 
Exactly which part of the e-brake are you looking for? The cables? If so what year truck? Have you converted to an auto trans?

KroAutomotiveInc 10-07-2011 01:37 AM

Re: E Brake help!
 
its a 1964 i need the 2 long ones that head for the drums and no still the 4 speed

KroAutomotiveInc 10-07-2011 01:39 AM

Re: E Brake help!
 
o yes the cables lol

Clyde65 10-07-2011 09:18 AM

Re: E Brake help!
 
I converted my 65 to the 66 type set up. 66's didnt use the transmission crossmember as a pivot point. pretty easy to do.

brawley 10-07-2011 10:00 AM

Re: E Brake help!
 
how do the 66's hook up ?? any pics.

KroAutomotiveInc 10-07-2011 02:06 PM

Re: E Brake help!
 
and where did you find the cabels?

Woogeroo 10-07-2011 02:13 PM

Re: E Brake help!
 
Most of the vendors that sell parts for our trucks sell the e brake cables. There are different lengths, one for the short and the other for the long... other than that everything should be the same.

e brake layout pics and other pics of the brakes


The Chevy/GMC parts vendors list

The Vendors Marketplace here at the 67-72chevytrucks.com forum.


good luck.

-W

KroAutomotiveInc 10-11-2011 07:04 PM

Re: E Brake help!
 
anyone bought these before brake cables out of lmc catalog for a 1964-65 long bed and do i need o buy the brake cable seal set?
http://www.lmctruck.com/icatalog/cbe/full.aspx?Page=95

KroAutomotiveInc 10-12-2011 02:34 PM

Re: E Brake help!
 
these appear to be what was on my truck from a 1974 c20
http://www.oreillyauto.com/site/c/de...3342&ppt=C0009

Clyde65 10-12-2011 03:54 PM

Re: E Brake help!
 
Quote:

Originally Posted by KroAutomotiveInc (Post 4947966)
anyone bought these before brake cables out of lmc catalog for a 1964-65 long bed and do i need o buy the brake cable seal set?
http://www.lmctruck.com/icatalog/cbe/full.aspx?Page=95

These are what I bought for my truck, well the middle cable and the front cable. the front cable is mad of aluminum or light steel and would pull right through the hold down bracket when you pulled it, I modded my old one and it works fine. I had to mod my middle cable since I was using the 65 rear cables though.

dracko 10-12-2011 04:28 PM

Re: E Brake help!
 
Do they sell the rubber boots that sit where the cable goes into the ribbed tube? My e-brake froze up a few times last year and i'm thinking its from moisture getting past those seals. Had to carry a MAP torch around just in case, lol.


All times are GMT -4. The time now is 05:02 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com