newbie looking for some advice on starting a build
 

hey guys,
i recently bought a 87 3+3 dually, 7.4 454 TBI. im looking to drop it as soon as i can to a good ride height, then save up to do the bags up right. this is my first build like this, so im in a whole new realm here.. i dont know what would be the best place to start, so if you could point me in the right direction i would appreciate it! meanwhile i shall take some pics
thanks

Re: newbie looking for some advice on starting a build
 

Make sure the brakes are in good working order first, then look over the engine for any rubber parts or wires that are about to fail, fix 'em, then git yo azz over to summitracing.com, punch in your vehicle info, then drool over all the cool junk for your truck, and decide what you want to buy first.

Re: newbie looking for some advice on starting a build
 

^^^^

What he said, but also think about doing a major overhaul by doing a complete disassembly as it is a 24 year-old truck, and you don't want to be playing a game of whack-a-mole with it. Take it all apart and start from the ground up, when you're done you'll be glad you did.

Re: newbie looking for some advice on starting a build
 

Or go to Jegs. I think their website is better laid out than Summits.

Re: newbie looking for some advice on starting a build
 

'preciate it guys, this thing was a gold mine tho, it runs great, only thing i cant figure out is it wobbles at about 40, i think i just need an alignment, heres some of what i got

[IMG]http://i1208.photobucket.com/albums/...ly35/01169.jpg[/IMG]
[IMG]http://i1208.photobucket.com/albums/...ly35/01162.jpg[/IMG]

Re: newbie looking for some advice on starting a build
 

Check all of your suspension bushings, especially the control arms and your ball joints too. A big heavy truck like that chances are good they're worn out. If you can do it yourself you'll save a fortune, and get the polygraphite replacements when you do so you'll only have to do it once.