5 0n 5 to 5 on 3/4 rotors
 

i just bought an 83 c10 to use for a donor truck for the front suspension and rear end.
the rotors are 5 on 5 bolt pattern.
is there a direct swap rotor that will allow me to change to 5 on 4 3/4 bolt pattern?

Re: 5 0n 5 to 5 on 3/4 rotors
 

Check with Mcgaughys, I think they offer one, if not it is easy to drill out the hub/rotor with a 5 X 4 3/4" lug pattern, that was what I did. Kieth

Re: 5 0n 5 to 5 on 3/4 rotors
 

search on here i think there was something about using 73 chevy van rotors or something like that to get the 5 on 4 3/4 pattern

Re: 5 0n 5 to 5 on 3/4 rotors
 

'83 C10, if they are the light duty rotors (1" thick), you can use '91 Camaro 1LE rotors. They are a DIRECT swap with the 5x4.75 bolt pattern.

Re: 5 0n 5 to 5 on 3/4 rotors
 

Ive got the 1.25 am pretty much limited to redrilling??

Re: 5 0n 5 to 5 on 3/4 rotors
 

Pretty much. The van rotors are not a direct swap...

Re: 5 0n 5 to 5 on 3/4 rotors
 

we have 1.25 c10 rotors in 5x4.75.

Re: 5 0n 5 to 5 on 3/4 rotors
 

Sweet! Now we have a place to point people when they ask. You should make a MINT- this comes up at least once a week...

Re: 5 0n 5 to 5 on 3/4 rotors
 

I've been think of doing this swap and using 2011 Camaro wheels.. Since they are going cheap on ebay.