The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   WHat did you get done 10/16/11 edition (https://67-72chevytrucks.com/vboard/showthread.php?t=489325)

old Rusty C10 10-16-2011 09:11 PM

WHat did you get done 10/16/11 edition
 
not much truck related.. i got my seat installed with the grey cloth LMC Cover
today i took some time off for some much needed fishing and between myself and another guy we caught 22 porgys (32 of them if you count the throwbacks) , one blackfish, and several other things that we threw back like a skate, a blowfish, a ray and some other thing we have yet to identify but we thought it was a mackeral baby
how about you all?

gofastbobby 10-16-2011 10:06 PM

Re: WHat did you get done 10/16/11 edition
 
Got my truck loaded on the trailer and ready to back to the transmission shop. Should be done this week. Then it goes back to my dads place where it'll get cab floors, rockers and cab corners. After that's done we'll work on setting the fuel cell in and rework the rear suspension, including caltracs. Going to be a great winter project.
Posted via Mobile Device

qksilver 10-16-2011 10:11 PM

Re: WHat did you get done 10/16/11 edition
 
made it thru another sunday brunch at work! I usually only cook for 50 people each meal, lunch and dinner but our every third Sunday brunch includes the whole campus, so 4 of us prep, cook, carve and other feed almost 1000!

Ask me this question on my days off, Thursday and Friday, and my answer would be completely different.

Steve

jdheff1982 10-16-2011 10:13 PM

Re: WHat did you get done 10/16/11 edition
 
I spent most of the day replacing the driver side window motor. What a PIA! I was able to easily get the thing off once, I put it back on, then it wouldn't come off unless I removed the entire actuator. Getting the SOB back and the window re-installed took most of my time.

I had planned on replaceing a blown collector gasket and fixing the stripped out intake mounting hole for the carb.

1LowToy 10-16-2011 10:15 PM

Re: WHat did you get done 10/16/11 edition
 
1 Attachment(s)
Got some more done on the interior, dash pad put in and polished the lenses on the gauges. Sunday yard clean up, took out the water cooler and found some material to make a radio blank plate for the truck. So I got distracted from mowing the back lawn :lol: Wife will never notice.............

Wife says I get ADD from that truck :lol:

Looks like a good place to put the fuel tank switch when I get that far

Karnage 10-16-2011 10:33 PM

Re: WHat did you get done 10/16/11 edition
 
Not a lot left for me to do but I got a few minor things done. Went down to the hardware store and got me some new screws that were missing in the dash and door panels. Got a minor dent to pop on my hood but there is another one that needs some work. Found a minor leak, planning on getting it fixed within a week or two. It's nothing serious so it does not need to be fixed right away. Fixed some sealing on the back windshield. Inspected my door window seals and found they are starting to fall apart so I'll need to get some new sealing for them. Also cleaned the cab carpet but that's something I do normally. It has been raining on and off since last month so we have been tracking some mud into the cab.

80stepsideguy 10-16-2011 11:27 PM

Re: WHat did you get done 10/16/11 edition
 
Just yardwork on friday,saturday bought 3 batteries, 2 for the vehicles n 1 for the lawnmower,pulled our mid 1800s studeabaker farm wagon lawn ornament in the garage for repairs,burned a big plie of dead branches,drank some beer.Today just relaxed.

thanks
pat

85burb 10-16-2011 11:29 PM

Re: WHat did you get done 10/16/11 edition
 
The 15th was my birthday and the wife bought me a rc car. Its a traxxas slash. Drove the burb to an rc car race and managed to run a few peoples cars over and broke a wooden barrier with it coming off long strait trying to slide it around corner. Then sunday was and am feeling sick. :barf:

jitteryguy 10-17-2011 12:46 AM

Re: WHat did you get done 10/16/11 edition
 
1 Attachment(s)
float !

juiceman650 10-17-2011 01:03 AM

Re: WHat did you get done 10/16/11 edition
 
Finished flushing my cooling system, replacing all the radiator hoses, new t-stat, fresh coolant. Also picked up a bed and a roll pan off an 86 today to replace the crashed bed on my 75.
Posted via Mobile Device

silvereagle07 10-17-2011 08:32 AM

Re: WHat did you get done 10/16/11 edition
 
I tinted the tail lights on my TBSS , removed the grille on my 84 to recondition it today and repaired the wiring to a fuel gauge on a 66 GMC that my uncle has restored.

motornut 10-17-2011 10:47 AM

Re: WHat did you get done 10/16/11 edition
 
rain rain rain
oh wait it stopped
ran out to the bro-inlaws to pull the 89 burb out gona strip and scrap it
used the 88 and let her rip in 4X4
http://youtu.be/RXmxOO1pgvc
both backs siezed up......like it was in park

ECU PIRATE 10-17-2011 03:33 PM

Re: WHat did you get done 10/16/11 edition
 
2 Attachment(s)
Gor the motor dropped in the old girl Saturday morning with the help of my Dad and my shop helper / best friend / drinking buddy...........

mej005 10-17-2011 05:53 PM

Re: WHat did you get done 10/16/11 edition
 
Spent all weekend and half of Friday installing vintage air in my truck.

http://i156.photobucket.com/albums/t...5/100_1490.jpg

bluex 10-17-2011 09:11 PM

Re: WHat did you get done 10/16/11 edition
 
Made a run to the not so local pull a parts. Got some more f-body regulators to sell and some other interior parts for them that are usually fast sellers. Picked up a chevy and gmc 73/74 grills as well. $40 for both grills.....

My main mission was to find a nice 60/40 seat or a new a/c controller for my '98. Struck out all day on any parts for it. Every GMT400 I came to was stripped....

http://67-72chevytrucks.com/gallery/.../IMAG02351.jpg


All times are GMT -4. The time now is 07:47 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com