Question on lengthening a short bed s10 frame.
 

I've done search after search after search and I've seen where a lot of people are shortening the ext cab s10 frames but I have yet to see where someone has lengthened a short bed frame. I've read where people have done it but havent seen any pics as to how they did it. I just bought a running '93 short bed with a 4.3l and was thinking of lengthing the frame under the cab where the frame is straighter. Any thoughts on this? Or maybe some pics on where someone has done something like this? Thanks for any advice and help.
Posted via Mobile Device

Re: Question on lengthening a short bed s10 frame.
 

I lengthened mine, the frame was already setup for bags and the price was right, almost free. I'll find some pictures and post them Saturday, remind me if I forget.

Basically I setup a jig contraption in the garage, measured 487 times then cut the frame in the straight area past the factory slide joint. For the extension I used sections of the original 50 frame, boxed the area and called it done.

Re: Question on lengthening a short bed s10 frame.
 

On my dads we lengthened the wheelbase rather than cutting the frame. We relocated the spring hangers and moved the rearend back about 8in I think. I have the detailed info on how to do this and pics saved on computer from another forum if you would like me to email them to you.
Posted via Mobile Device
Posted via Mobile Device

Re: Question on lengthening a short bed s10 frame.
 

measure like this to get it square. it doesn't matter if the frame is different the method is the same and works well.

Re: Question on lengthening a short bed s10 frame.
 

That's the most desirable method, the rear section of mine had been altered to a point I couldn't relocate the hangers.

Re: Question on lengthening a short bed s10 frame.
 

Thanks guys. I just picked up my s10 tonight. Hopefully soon I can start tearing it down. S10fan, shoot me some pics if you can. Also, can you post some of the jig you made.

Chin, any pics would be helpful. I also thought of lengthening it this way.
Posted via Mobile Device

Re: Question on lengthening a short bed s10 frame.
 

This thread has some valuable information.....

http://www.killbillet.com/showthread...ght=chevy+step

Re: Question on lengthening a short bed s10 frame.
 

this guy has some great ideas!

Re: Question on lengthening a short bed s10 frame.
 

I've modified (actually repaired) a couple of frames in the past by getting the back half of another frame and splicing the new section to the existing frame. That is the simplest way to do it but maybe not the least expensive but the back half of a stock S-10 frame shouldn't cost much bare.

Re: Question on lengthening a short bed s10 frame.
 

I was gonna link you to my 48 build but S10 fan beat me to it.

Gosh you make a fella blush, lol!:hm:

Re: Question on lengthening a short bed s10 frame.
 

That's a great step by step. Talk about keeping it simple, lol. Looks like I found a good way to lengthen my wheelbase. Hopefully soon I can start tearing down my S10. Thanks for all the help guys. This has been a great site for help and info.
Posted via Mobile Device

Re: Question on lengthening a short bed s10 frame.
 

This is what we went by when we did it. I had it saved on my computer as pdf and was gonna post the link but S10Fan beat me to it.

With 62chevyII's detalied build it made lenghthening the wheel base a piece of cake! I've never lengthened a frame but I don't see how it could be any easier or go any smoother.