ID my parts please
 

When I bought this rig with a bed full of parts, these three sheet metal pieces were included. PO was working on rebuilding the heater box, so I surmised these had to do with vents/heat & ducting.

Red oxide sheet metal: I have no idea. Square edges aren't too common in my experience

Silver sheet metal: screens for floor vents? Placed in between the firewall and fenders/side panels?

Thanks,

MJH

Re: ID my parts please
 

I pulled 2 of the square vents from a 61 deluxe pickup last summer. they covered the kickpanal vents

Re: ID my parts please
 

The two oval items are the directional air flow covers for the cab interior fresh air vents ( operated by a push-pull lever on driver and passenger side cab ), the vents are located at the kick panels. The square item is for the heater box...I believe it is for the flap inside the box to let in hot air / block off hot air from the heater core depending on lever position.

Re: ID my parts please
 

My 57 has those oval ones, I have never seen the same ones on a 67-72

Re: ID my parts please
 

Thanks. The PO was also restoring a 57 Apache when he went to his eternal reward. His widow threw in all sorts of stuff when I bought my 68 C10--manual, heater core, etc. I'll bet the ovals were part of the other build.

MJH