WANTED your stock 4x4 parts!!!
 

Anybody putting a lift on and gonna scrap their old rear leaves? I need em! Looking for 3/4 ton rear leaves. even 2wd will work, but must measure 26" from pin to either end (center of eye) along the leaf = 52".

Also need a stock steering arm from a corporate. 3 bolts unevenly spaced. I can get a pic.

thanks!

Re: WANTED your stock 4x4 parts!!!
 

Call WFO Concepts. I'm sure they've got a used arm

www.WFOConcepts.com

Re: WANTED your stock 4x4 parts!!!
 

somebody has to have torn a 3/4 ton down; ive seen a ton of lifts on here!

Re: WANTED your stock 4x4 parts!!!
 

Please post your WTB here http://67-72chevytrucks.com/vboard/c...cat.php?cat=19

Re: WANTED your stock 4x4 parts!!!
 

there's never any traffic there! I wanted the 4x4 guys.

Re: WANTED your stock 4x4 parts!!!
 

You will have trouble finding stock leaves due to using a cutting torch to get them off. I have replaced the originals on 4 3/4 ton trucks and had to cut them off because I couldn't get the bolts out. The rubber bushings seize up on the bolt and there is no other way to get them out.