Big Block Chevy cam, springs & pushrods
 

I have a Big Block Chevy (Mark IV) Comp XE294 cam (cam only, no lifters), Summit 1pc, .080" wall, 3/8" pushrods, and a set of Crower 68340 valvesprings for sale. The cam and pushrods have been installed, but never run, and the valvesprings have a few hours of runtime on them and are like new. The springs have been checked by a local machine shop (Rebel Rebuilders) are all are within spec. I changed over to a roller cam, so that's why I'm selling this stuff. Specs for everything are below. You can see what I paid for everything in the links provided below. I will take $220 SHIPPED!!!. First "I'll take it" gets it.

http://www.summitracing.com/parts/CCA-11-254-4/
Cam Style Hydraulic flat tappet
Basic Operating RPM Range 2,800-7,000
Duration at 050 inch Lift 250 int./256 exh.
Advertised Intake Duration 294
Advertised Exhaust Duration 306
Advertised Duration 294 int./306 exh. .
Valve Lift with Factory Rocker Arm Ratio 0.588 int./0.593 exh.
Lobe Separation (degrees) 110
Grind Number CB XE294H-10

http://www.summitracing.com/parts/SUM-1439250/
Summit Racing Part Number SUM-1439250
For Use with Guideplates Yes
Pushrod Tube Diameter 3/8 in.
Pushrod Material Chromoly
Intake Overall Length (in) 8.280 in.
Exhaust Overall Length (in) 9.250 in.
One-Piece Pushrod Yes
Wall Thickness (in) 0.080 in.
Heat-Treated Yes
Quantity Sold as a set of 16.

http://www.crower.com/valve-springs-...amper-797.html
Summit Racing Part Number CRO-68340-16
Number of Springs Per Valve Dual
Outside Diameter of Outer Spring (in) 1.500 in.
Coil Bind Height (in) 1.080 in.
Damper Spring Included Yes
Spring Rate (lbs/in) 452 lbs./in.
Inside Diameter of Outer Spring (in) 1.120 in.
Inside Diameter of Inner Spring (in) 0.755 in.
Quantity Sold as a set of 16.

Re: Big Block Chevy cam, springs & pushrods
 

ttt

Re: Big Block Chevy cam, springs & pushrods
 

Man I wish the cam was a little smaller I would jump on that deal. I live at 7200 ft. I think it would be to much.
Posted via Mobile Device

Re: Big Block Chevy cam, springs & pushrods
 

ttt for any Christmas shoppers...

Re: Big Block Chevy cam, springs & pushrods
 

ttt for Friday the 13th! :chop:

Re: Big Block Chevy cam, springs & pushrods
 

bump for the all those Valentine's Day shoppers... You KNOW your wife would rather have a hard hittin' big block over a little tennis bracelet! :lol:

Re: Big Block Chevy cam, springs & pushrods
 

ttt for TAX TIME!!! I know some of you are building a BBC with that fat refund check! :lol:

Re: Big Block Chevy cam, springs & pushrods
 

TTT Would be sweet in my 402 for sure.

Re: Big Block Chevy cam, springs & pushrods
 

ttt...

Re: Big Block Chevy cam, springs & pushrods
 

ttt

Re: Big Block Chevy cam, springs & pushrods
 

anyone out there need any BB stuff?

Re: Big Block Chevy cam, springs & pushrods
 

4th of July deal of the day! :lol: $220 - FREE SHIPPING anyone??

Re: Big Block Chevy cam, springs & pushrods
 

Ttt
Posted via Mobile Device

Re: Big Block Chevy cam, springs & pushrods
 

ttt for xmas

Re: Big Block Chevy cam, springs & pushrods
 

seperate peices?

that cam is a bit big for some of our "street" motors..

Re: Big Block Chevy cam, springs & pushrods
 

What piece(s) did you have in mind?? Yeah, it's a stout cam. Should put a well built 454 (or bigger) well over the 550 hp range with a good set of heads.

Re: Big Block Chevy cam, springs & pushrods
 

ttt for tax refund season!

Re: Big Block Chevy cam, springs & pushrods
 

ttt for the weekend
Posted via Mobile Device

Re: Big Block Chevy cam, springs & pushrods
 

reasonable offers?

Re: Big Block Chevy cam, springs & pushrods
 

ttt

Re: Big Block Chevy cam, springs & pushrods
 

ttt

Re: Big Block Chevy cam, springs & pushrods
 

Would you seperate the package and take $50 for the push rods.

Re: Big Block Chevy cam, springs & pushrods
 

I would separate the pushrods for $60 and you pay shipping.

Re: Big Block Chevy cam, springs & pushrods
 

Is everything still for sale? Please say yes, lol.

Re: Big Block Chevy cam, springs & pushrods
 

Yep, still have every bit of it.