The 1947 - Present Chevrolet & GMC Truck Message Board Network - 67 c10 prothane rear control arm bushing

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - 67 c10 prothane rear control arm bushing (https://67-72chevytrucks.com/vboard/showthread.php?t=494319)

gysgtc

11-17-2011 02:01 PM

67 c10 prothane rear control arm bushing

Can anyone tell me which direction the tapper part of the thrust washer faces? Thanks

dznucks

11-17-2011 04:02 PM

Re: 67 c10 prothane rear control arm bushing

I dont know of a "Thrust washer" for the trainling arms. Im assuming you are talking about the poly ring that somehow sandwiches in with everything else. The taper should go to the outside...if we are talking about the same thing. I didnt use them.

gysgtc

11-18-2011 08:04 AM

Re: 67 c10 prothane rear control arm bushing

2 Attachment(s)

Here are pictures of what I am talking about. Does the tapper go inboard or outboard?

gysgtc

11-18-2011 04:10 PM

Re: 67 c10 prothane rear control arm bushing

Anyone

chevykevy

11-18-2011 04:21 PM

Re: 67 c10 prothane rear control arm bushing

Like your first picture. Taper out. I had the same question a couple years ago when I did mine for the first time.

tubbedII

11-18-2011 05:32 PM

Re: 67 c10 prothane rear control arm bushing

Subscribed so I remember when I do mine! Thanks for asking and posting the pic gysgtc!

gysgtc

11-18-2011 06:25 PM

Re: 67 c10 prothane rear control arm bushing

Thank you for the help. I even called the manufacturer and they couldn't help.

All times are GMT -4. The time now is 10:32 PM.