|
31x18x15
ok i got a 64 fleetside an i got a guy im going to trade for some 31x18x15 mickey thompson sportsmans an was wondering how hard is it going to be to tuck them under the bedsides with the airbags i want to use on my truck. was goin to use the stock trailing arms if possible. also want to get about as low as possible dont have to lay rockers
|
Re: 31x18x15
No advice
Posted via Mobile Device |
Re: 31x18x15
check out 1bad62sprostreet build thread, I think he might be using those...
|
Re: 31x18x15
I looked but I think he has the 31x15x15
Posted via Mobile Device |
Re: 31x18x15
1 Attachment(s)
Thats what I am running on my 66 stepside.[IMG]
|
Re: 31x18x15
do you have any pics of rear frame did you have to narrow the rear or is it stock rear
|
Re: 31x18x15
1 Attachment(s)
Yes I did narrow the frame and the rear can't recall how much off hand its been a while since it was done. The wheels are 15x14 with a 4" back space.
|
Re: 31x18x15
think you can throw a tape line on it maybe tomorrow
|
Re: 31x18x15
I won't be around it till after Thanksgiving but I would be happy to then. What I done when I narrowed mine was buy the wheels and tires so I had the correct measurements then I narrowed the frame for the clearance I wanted around the tire. Once I had the wheels and tires fitting under the fenders like I wanted then I measured from the bolt surface of each wheel to determine the width of the rearend.
|
Re: 31x18x15
k thanks all
|
Re: 31x18x15
Not what you want but close. These are 29x20x15's on 20x13" wheels.
http://i1085.photobucket.com/albums/...0/f04e214d.jpg Posted via Mobile Device |
| All times are GMT -4. The time now is 04:44 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com