A local truck (in pieces) for sale with porterbuilt
 

A local guy has parts for a truck for sale (in pieces)
Somebody weigh in on this...

It is basically a chassis, a cab (no doors), hood, no bed to my knowledge and a lot of aftermarket lowering parts. I asked him for pics, but they are horrible. Nothing is put together, it's all laying around in boxes, there isn't really a good picture in the whole mess. The chassis looks like he just removed it. No works been done to REALLY say a restoration is under way.


Give me a guess as to a price for the WHOLE lot, because he hasnt decided if he wants to break it up yet.

Here is what he has:

"porter built suspension to lay frame on 30'' front and rear. air ride (plug and play), all lines, fittings, tank, compressor, bags, wiring, control box everything. c notch and drop member ,tubular trailing arms, trailing arm crossmember, Carrier Bearing X-member, Fully Adjustable Trac Bar, the whole 9 yards drop spindles (complete new rotors calipiers bearings ball joints ), tublar control arms, u name it 95% bolt in brand new never installed even have chevy to mutang power steering lines to use factory chevy pump. all u need is your steering linkage adapter. comes with a mustang rack"

a cab with new rockers and cab corners (not installed ) no doors or windows I believe.

rear roll pan
led taillights =the ones from lmc
new radiator support
used hood in great shape
3 core rad.,
frame already mini c notched havent cut it up yet,
12 bolt 5 lug rearend,
front bumper
70 grille
door panels
glove compartment doors
door handles
spare vent windows and bar

Re: A local truck (in pieces) for sale with porterbuilt
 

ttt

Re: A local truck (in pieces) for sale with porterbuilt
 

Not sure on the value, but maybe check into porterbuilt prices for this stuff....

a cab with new rockers and cab corners (not installed ) no doors or windows I believe=$150-$200

rear roll pan=$75
led taillights =the ones from lmc=$75
new radiator support=$150
used hood in great shape=$75-$100
3 core rad.,=$150 used i assume
frame already mini c notched havent cut it up yet=$150-$200
12 bolt 5 lug rearend=$100
front bumper=$50-$75
70 grille=$100 (if in driver shape...cheaper)
door panels=$40
glove compartment doors=$25
door handles=$10 ea
spare vent windows and bar=$75 if chrome $40 if black

Re: A local truck (in pieces) for sale with porterbuilt
 

You are thinking about the same as I was. My guess was about $3000 for all of it. He's convinced it's gonna sell for $6k. The only reason most people would even consider what he's got is to get the PB stuff. I think I offended him when I said it was only worth about $3k.

Re: A local truck (in pieces) for sale with porterbuilt
 

He might have 6-8K tied up in it with the parts...but I agree...about 3K as a blown apart project.

Re: A local truck (in pieces) for sale with porterbuilt
 

:agree:

Re: A local truck (in pieces) for sale with porterbuilt
 

i seen this ad. didnt contact him, but thought 6k was a little over the top also. did you go look at this stuff?

Re: A local truck (in pieces) for sale with porterbuilt
 

Nope, he sent pics and they were horrible. He's got about 3k worth of parts.