WHat did you get done 11/27/11 turkey day edition
 

Mine made it into the body shop for its new rockers etc. We will see what happens tho it was a short week and three weeks turned into "youll have it by christmas" so already im not too thrilled
How about you all?

Re: WHat did you get done 11/27/11 turkey day edition
 

got my swb stepper box home and dis-assembled to make a custom box for my wheeler and also started in on body work of my ccdrw's box

Re: WHat did you get done 11/27/11 turkey day edition
 

I was just thankful we did not have turkey, and I drove the truck.

Re: WHat did you get done 11/27/11 turkey day edition
 

I got my serpentine hooked up and working. ps works, alt works, and built a air intake tube for the blower (not sure if I like it yet)

http://i1082.photobucket.com/albums/...g/0f0ab870.jpg

Still so much to do.... Does it ever end???

Re: WHat did you get done 11/27/11 turkey day edition
 

Well Thursday at too much and slept

Friday put up the christmas lights

Saturday rained so i worked on the Tuned Port Injection setup i am installing on the truck in two weeks.

Today was cold outside but i toughed it out.
1. Got the Heater Controller working. Would not actuate to anything except heater. Read several threads on here and removed the cover off the duct in the middle. Dirt Dobber mud fell out. What do you know, it works again.
2. Put my refinished door panels back in. SEM'ed them black and re valoured the pad around the door handles.
3. Put the missing bed bolt in that i have had on my desk for 2 months.
4. Made a new ground strap for the fire wall to engine.
5. Got the door pin on the pass side working again. Now the light comes on when i open the door.

Not a bad day

Re: WHat did you get done 11/27/11 turkey day edition
 

brought my new blazer home, went to the junk yard and got a glove box door and a pretty clean passenger door to replace the dented in non working everything door.

Oh and logged in here for the first time in over a year

http://i68.photobucket.com/albums/i1.../Photo2484.jpg

Re: WHat did you get done 11/27/11 turkey day edition
 

Before winter is finally here, I decided to replace my belts and high beam lights.

I am sort of had 2nd thoughts the other day; wondering if I should have held out for a diesel truck. I would love to have the mpg that the 6.2 diesel offers. The 454 is a beast of a motor, but I also like diesels.

Which would be cheaper...would it be more realistic to convert to the diesel motor, or should I just look at trading the entire truck?

Re: WHat did you get done 11/27/11 turkey day edition
 

Put new ProThane body mount bushings in,mounted my billet grille and mounted(started to) my tow hitch.

Re: WHat did you get done 11/27/11 turkey day edition
 

Not much done truck related, but I went and traded my old Foreman for a new one .

http://images1.snapfish.com/23232323...64233%3Anu0mrj

http://images1.snapfish.com/23232323...64333%3Anu0mrj

http://images1.snapfish.com/23232323...%3B33%3Anu0mrj

http://images1.snapfish.com/23232323...%3A33%3Anu0mrj

Re: WHat did you get done 11/27/11 turkey day edition
 

I installed my heater core and got my heater working. I know that Texas winters arent much, but I could not go all winter without heat.

Re: WHat did you get done 11/27/11 turkey day edition
 

On Thursday I cleaned the shop at my house so I could get back in the door of it took all morning and half the afternoon

On Friday I mowed the yard to chop up all the leaves still need to burn around the puond but they are to wet now after that I washed the mower and put it up for winter. Then I washed the truck and cleaned out the bed. I then washed all the interior trim that I had removed previously with hot water and soap and hung it all up to paint.

Saturday had to go to my wifes families fro Turkey Day left at 5am and got home at 10pm so I did not get anything done.

Today I went down to the and found one salamander heater not working properly and the other out of fuel so had to run in to town and get diesel for it. Then I wiped down all the vinyl with vinyl cleaner and painted the pieces of interior with color bond saddle colored paint all the pieces looked pretty good when i got done I will probably put them in some time this week. Then about 2 o'clock had to go to a freind's little girls birthday party so that shot the rest of the day.

Has anybody put sound deadening behind the door panels and does it help much.

So What Did You Get Done Over The Holiday Weekend on the Truck
 

What Did Ya'll Get done on your Beasts this long weekend????? I Spent too much Time on the road and didn't get a thing done?! :(

Re: WHat did you get done 11/27/11 turkey day edition
 

I replaced both front inner axle seals on my K20 (WHAT A PAIN!), as well as adjusted shifter and transfer case linkage to compensate for the body lift. No more rolling out of park, and no more getting stuck between 2HI and 4HI on the t-case!

Re: WHat did you get done 11/27/11 turkey day edition
 

nope it NEVER ends.... Looks Good though... how did you make it

Re: WHat did you get done 11/27/11 turkey day edition
 

Welcome Back!!!!! Good to see...... I like the new addition

Re: WHat did you get done 11/27/11 turkey day edition
 

Personally.... I like the swap... cause finding a Good CLEAN diesel Truck.......is hard to do... I'm doing the Swap myself cause I found Cleaner gas trucks than diesel trucks..... thats my .02

Re: WHat did you get done 11/27/11 turkey day edition
 

spent thurs and friday at the parents then saturday I went out and started moving stuff around so I could have both trucks in the shop and walk around them then I spent the rest of the day getting the second truck moved in

then sunday I started to figure out wats wrong with the engine in my daily driver crew cab

Re: WHat did you get done 11/27/11 turkey day edition
 

Thursday- My brother and I installed the shortened column. I also re ran some wiring under the hood.

Friday- had to work. Miami needed their frozen foods.

Saturday- headed east to Daytona Beach for the Turkey Rod Run. Found a cheap set of headers that were in need of a little loving. Didn't see any of the car show as it took all day to wander the swap meet.

Sunday- gave the headers a little loving with some por15 rust prep, and then my brother sprayed them with their dark grey exhaust manifold paint.
Posted via Mobile Device

Re: WHat did you get done 11/27/11 turkey day edition
 

Thanks, I used a 3.5" u-bend, cut and welded an offset on it, then welded a support to bolt to the fender well.

Re: WHat did you get done 11/27/11 turkey day edition
 

Thursday - Food and Football!!!

Friday - Lights around the house

Saturday - Replaced the heater core and blend door actuator...and that was enough to occupy a Sat.

Sunday - Not sure, will have to ask her what I got accomplished :)

Re: WHat did you get done 11/27/11 turkey day edition
 

sanding and more sanding.. got a little primer down.. ordered all new chrome and new gaskets.. dropped the bench seat off, decided not to go bucket... pulled the bed, tore out the old wood.. more sanding..

i am off work nov and dec, so i have more time to play.

Re: WHat did you get done 11/27/11 turkey day edition
 

I got a good deal on a new hitch, it´s from a Jeep Cherokee. So I fabricated a mount for it, I think it turned out quite good. Now I hope that my bed wood turns up during the week so I can finish up the bed.

Re: WHat did you get done 11/27/11 turkey day edition
 

Ate food till I was about to pop, next day went to Pick N Pull and got new Mirrors

Re: WHat did you get done 11/27/11 turkey day edition
 

Decided to keep my truck and not sell it!!

Re: WHat did you get done 11/27/11 turkey day edition
 

Tuesday: Got back in the game with an 87 gmc swb, 350 tbi/350 for $1200. Wed: got new phone, fixed bad battery cable, cleaned out NASTY interior and windows, gave it a bath. Thurs: T-day. Fri: scraped rebel flag sticker off of slider on new truck, got flat fixed on 05 ccsb. Sat: went to fix non-op fan hi. wound up tearing whole dash out and fixing lots of misc stuff. Sun: reassembled from Sat, installed stereo I had around, put favorite Camaro wheel in, replaced idiot ricer shift knob. Mon: Went to chev. dealer and got little white clip for blend door and installed. We gots heat, vent, and defrost now!