The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)
-   -   Front axle (https://67-72chevytrucks.com/vboard/showthread.php?t=498022)

awedel 12-11-2011 04:47 PM

Front axle
 
Hi all, my front right axle is broken on my 72 Blazer. I have half ton running gear and I need to order the axle shaft asap. I don't have the option right now to take out the old shaft and measure it's length and spline count. Anyone have the info off hand!?!?
Posted via Mobile Device

1971k567cam 12-11-2011 07:59 PM

Re: Front axle
 
Not sure on measurments but I found that 73-78??? had bigger axles and will swap into a dana 44. I was not able to find any in the wrecking yards here but I lucked out and budy of mine had a set of chrome moly shafts that I bought off him. I have a set that I took out of my blazer that were stock I still have them under the bench at work.

Mike C 12-14-2011 09:39 PM

Re: Front axle
 
http://www.overstockdiffparts.com/ has a sale right now. You may want to look over there and see if they have your year axle and just order that. They were Chro-Mo $52 for short inner and $62 for long inner. You might have to buy an outer as well because the '72 has smaller u-joints. I was going to look for you, but you didn't say if it was short inner, long inner, or an outer.

eidt: duh, right front or the short one if inner.


All times are GMT -4. The time now is 02:40 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com