The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Any difference in frames? (https://67-72chevytrucks.com/vboard/showthread.php?t=498026)

Chevyman680063

12-11-2011 05:53 PM

Any difference in frames?

Are there any differences in the '67 short fleet and the '68 short step frames?

black_sheep454

12-11-2011 06:08 PM

Re: Any difference in frames?

Not that I know of.
Posted via Mobile Device

Livrat

12-11-2011 06:11 PM

Re: Any difference in frames?

67's are flat where the steering box mounts, Some 68's had raised areas around the bolt hole and a dimple for a power steering box, 67's did not have the upper frame rail under the engine mounts trimmed like the 68-72's did, other than that they are pretty much the same

Shyguy

12-11-2011 06:11 PM

Re: Any difference in frames?

The only difference I know is that the '67 does not have the dimple for the steering box and most '68s do.

1972RedNeck

12-11-2011 06:11 PM

Re: Any difference in frames?

Didn't some frames have a bend over the rear axle and others were straight?

All times are GMT -4. The time now is 04:47 AM.