The 1947 - Present Chevrolet & GMC Truck Message Board Network - Automatic Transmission install questions

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Automatic Transmission install questions (https://67-72chevytrucks.com/vboard/showthread.php?t=498357)

Touchdown67

12-13-2011 07:47 PM

Automatic Transmission install questions

I am thinking about putting an auto transmission in my 65 C10. What I am wondering is if I should use a Ididit column or an auto chevy column out of a later model truck? If so which column would fit and work best. I was thinking of putting in a 200R4 trans. Is this a pretty easy swap? Is this the right transmission? I kinda like the stock look with my truck. Any help or photos would be greatly appreciated.

Rich 5150 69

12-13-2011 11:02 PM

Re: Automatic Transmission install questions

What are you running for engine trans now, and yes any 67 to 86 auto ( tilt or standard ) column will work including van, you`ll make up the differance with an intermediate column section from just aft of the firewall to the steering box.

Touchdown67

12-13-2011 11:50 PM

Re: Automatic Transmission install questions

Quote:

Originally Posted by Rich 5150 69 (Post 5063772)

400 Small block with the manual column 3 speed...

All times are GMT -4. The time now is 02:35 AM.