WTB: Oil filler tube manifold style
 

Looking for an oil filler tube that was used in the older sbc engines located in the front of the intake manifold. Please LMK condition and price including shipping to 08753.

Thanks
Scott

Re: WTB: Oil filler tube manifold style
 

Just the filler tube or the whole intake manifold?
Posted via Mobile Device

Re: WTB: Oil filler tube manifold style
 

Just looking for the filler tube.

Re: WTB: Oil filler tube manifold style
 

How about an original chrome one off a early Corvette? I also have the common type.

Re: WTB: Oil filler tube manifold style
 

Pics and price would be great.

thanks

Re: WTB: Oil filler tube manifold style
 

ttt

Re: WTB: Oil filler tube manifold style
 

Here's a couple pics. It was removed from a 66 Corvette 327 Holley intake. 20.00 shipped. I looked for my early reg type and couldn't find them. I only had a few minutes to look. I'll be able to look more tomorrow. Thanks, Tom

Re: WTB: Oil filler tube manifold style
 

Tom, thanks for the pics. Would prefer a plain stock one, the type that uses the push in breather top.

Re: WTB: Oil filler tube manifold style
 

ttt

Re: WTB: Oil filler tube manifold style
 

ttt

Re: WTB: Oil filler tube manifold style
 

Sorry Scott I can't seam to find the tubes I have. ttt for ya

Re: WTB: Oil filler tube manifold style
 

Thanks for checkin Tom

Re: WTB: Oil filler tube manifold style
 

I have one with the support and another without the support that I can't seem to get the 4bbl manifold to reliece! $50.00 for either one. WES

Re: WTB: Oil filler tube manifold style
 

Thanks Wes but hoping to find one on the inexpensive side.

Re: WTB: Oil filler tube manifold style
 

Are you looking for something like these in the photos? I am planning on going to a salvage yard nearby and can ask how much they want.

Do you know how to remove one of these?

Keith

Re: WTB: Oil filler tube manifold style
 

dont want to hyjack Scotts post but if you can get me that manuel choke 2 barrel in the bottom left or at least a price for it i would be interested ship in flat rate if Scott wants one of those oil fill tubes ill pay the ship and drop it to him or whatever works thanks
Jess

Re: WTB: Oil filler tube manifold style
 

Keith, looking for one like in the last pic. A breather cap just pushes into the tube. Looking for one without the tab for the carb return spring. Sorry have no idea how to remove one.

Jess, thanks for the assist.

Re: WTB: Oil filler tube manifold style
 

Only way to remove one without damage is to use a socket or something just under the intake hole size and drive it out.

Re: WTB: Oil filler tube manifold style
 

Scotth: i think this is the part you are looking for. Push in type oil fill tube. Nice and clean inside and out. No dents or dings. Look at pics. Asking 20.00 and 5.00 shipping. Thanks Don

Re: WTB: Oil filler tube manifold style
 

I apologize ScottH and Zicc1835, I did not make it out to the salvage yard Friday. They are closed on the week ends, so I won't be able to make it out untile Monday at the earliest.

Zicc1835, can you tell me which photo you are referring to? All are of 1967-1972 C10s except for the last one. The last one is out of an impala mid 60s. I used to have a two barrel Rochester with manual choke like yours. I now have a 4 barrell edelbrock. I had purchased several of the two barrel Rochesters from local salvage yards and rebuilt them. I ended up purchasing a reman Rochester from AutoZone if I am not mistaken. I purchased all of the carbs because I was trying to correct a problem of back firing. It turns out it wasn't the carb but the timing chain had stretched too far. I don't have the carbs anymore.

Keith

Re: WTB: Oil filler tube manifold style
 

ScottH, I finally made it out to the salvage yard yesterday. The guy wants $95 for the oil filler tube including the intake manifold. He says he has never had any luck removing an oil filler tube so he will sell both the oil filler tube and the intake manifold as a complete unit.

Sorry, it doesn't sound like that good of a deal.

Zicc1835, the salvage yard guy wants $75.00 for the carbeurator. He also said it most likely will need rebuilding.

If either of you are interested I will forward the contact information. I apolagize for taking so long to get out to the salvage yard.

Keith