The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Alternate Tinkerings (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=140)
-   -   Cat 3116 build in 1972 IH Pickup (https://67-72chevytrucks.com/vboard/showthread.php?t=501404)

tecky11 01-03-2012 02:45 AM

Cat 3116 build in 1972 IH Pickup
 
here is the build up on the 72 IH that i have. Will get pics in the Morning

CowboyProtectionUnit 01-03-2012 02:49 AM

Re: Cat 3116 build in 1972 IH Pickup
 
I've Been thinking about that.... in My 88 GMC... what Tranny Are you looking at Using...

tecky11 01-03-2012 02:54 AM

Re: Cat 3116 build in 1972 IH Pickup
 
i will be using a Eaton Fuller 6610 tranny. just be forewarned it is a HEAVY engine. 1500 lbs dry. and it barley fits in the bay of my 72. if you have a 4x4 you will have to mod the oil pan. my model uses 8 gallons of oil.

CowboyProtectionUnit 01-03-2012 03:05 AM

Re: Cat 3116 build in 1972 IH Pickup
 
yeah I figured as Much... mines a 1ton so I'm Not worried about the Frame.. I'll Be Following your build Closely

tecky11 01-03-2012 03:07 AM

Re: Cat 3116 build in 1972 IH Pickup
 
thank you. i have lots of pics i just have to try and remember what order i took them in :)

CowboyProtectionUnit 01-03-2012 03:35 AM

Re: Cat 3116 build in 1972 IH Pickup
 
Mind If I ask what you payed Ballpark for the motor?

tecky11 01-03-2012 03:37 AM

Re: Cat 3116 build in 1972 IH Pickup
 
i got a great deal 2500. that includes the clutch, pressure plate, alt, ac compressor, and air compressor

Dieselwrencher 01-03-2012 03:49 AM

Re: Cat 3116 build in 1972 IH Pickup
 
In for this one. Sounds like a cool swap!

tecky11 01-03-2012 03:51 AM

Re: Cat 3116 build in 1972 IH Pickup
 
thank you ryan

CowboyProtectionUnit 01-03-2012 03:52 AM

Re: Cat 3116 build in 1972 IH Pickup
 
Nice!!!!!!!

tecky11 01-03-2012 03:52 AM

Re: Cat 3116 build in 1972 IH Pickup
 
yeah i stole it :) but agian i was patient too :)

Dieselwrencher 01-03-2012 04:08 AM

Re: Cat 3116 build in 1972 IH Pickup
 
Just have to be at the right place at the right time huh? :lol: Or know some one who knows some one where some certain thing is. :lol:

tecky11 01-03-2012 04:12 AM

Re: Cat 3116 build in 1972 IH Pickup
 
yep you got it ryan :)

tecky11 01-04-2012 01:56 AM

Re: Cat 3116 build in 1972 IH Pickup
 
ok as promised this batch is the factory config.
http://i846.photobucket.com/albums/a...218_180216.jpg
http://i846.photobucket.com/albums/a...218_180226.jpg
http://i846.photobucket.com/albums/a...218_180234.jpg
http://i846.photobucket.com/albums/a...218_180241.jpg
http://i846.photobucket.com/albums/a...218_190551.jpg
http://i846.photobucket.com/albums/a...l/PICT0001.jpg
http://i846.photobucket.com/albums/a...l/PICT0002.jpg
http://i846.photobucket.com/albums/a...608_183415.jpg

tecky11 01-04-2012 02:13 AM

Re: Cat 3116 build in 1972 IH Pickup
 
this is were i am as of this week.
http://i846.photobucket.com/albums/a...l/IMG_7055.jpg
http://i846.photobucket.com/albums/a...l/IMG_7063.jpg
http://i846.photobucket.com/albums/a...l/IMG_7071.jpg
http://i846.photobucket.com/albums/a...l/IMG_7072.jpg
http://i846.photobucket.com/albums/a...l/IMG_7077.jpg
http://i846.photobucket.com/albums/a...l/IMG_7081.jpg
http://i846.photobucket.com/albums/a...l/SUNP0018.jpg
http://i846.photobucket.com/albums/a...l/SUNP0033.jpg
http://i846.photobucket.com/albums/a...l/SUNP0027.jpg

tecky11 01-04-2012 02:26 AM

Re: Cat 3116 build in 1972 IH Pickup
 
and yes the person covered in greae is yours truly :)

CowboyProtectionUnit 01-04-2012 05:41 AM

Re: Cat 3116 build in 1972 IH Pickup
 
I like it!!!!!!!!!!!!!!!!!

tecky11 01-04-2012 10:03 AM

Re: Cat 3116 build in 1972 IH Pickup
 
thank you, it will be a very tight squeeze bit it will fit. i hae to remove the engine driven fan and use electric

Dieselwrencher 01-04-2012 05:55 PM

Re: Cat 3116 build in 1972 IH Pickup
 
Do you have room behind the dash to cut the fire wall and move it back? It looks good sitting there. At least your truck is 2wd so you don't have any real clearance to worry about besides the ground. :lol:

tecky11 01-04-2012 09:32 PM

Re: Cat 3116 build in 1972 IH Pickup
 
i am going to try and not cut into the firewall

meter swinger 01-05-2012 02:52 AM

Re: Cat 3116 build in 1972 IH Pickup
 
My travelall is begging me to git that tired ol 392 outta there and do something like this. I can hear it now coming down the road and sounding like a combine. :metal:
Posted via Mobile Device

tecky11 01-05-2012 09:53 AM

Re: Cat 3116 build in 1972 IH Pickup
 
well this enigne would out live the old 392 AND get better milage:)

6lcummins 01-05-2012 06:32 PM

Re: Cat 3116 build in 1972 IH Pickup
 
Quote:

Originally Posted by tecky11 (Post 5103088)
well this enigne would out live the old 392 AND get better milage:)

You hope.... lol

tecky11 01-05-2012 06:38 PM

Re: Cat 3116 build in 1972 IH Pickup
 
Yep i sure do :)
Posted via Mobile Device

cam.man67 01-05-2012 11:03 PM

Re: Cat 3116 build in 1972 IH Pickup
 
NEat project! I love the old IH trucks, this is just a great idea!


All times are GMT -4. The time now is 05:29 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com