The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - I need one of these (https://67-72chevytrucks.com/vboard/showthread.php?t=502523)

I need one of these

I posted in the WTB thread section but I thought I'd throw it out here also. Any of you guys that have parts trucks, do you have a passenger side kick panel vent cover like what's pictured but without the rust holes? There are about 30+ spot welds holding them on so if you don't want to cut them all out you could just cut around it to get it off. Thanks.

Re: I need one of these

How big of a hurry are you in to get it PD ??
I'm currently tearing into one and most of what I need is drivers side stuff.
Yours for the asking just pay the shipping.
I'll check it out tonight after work,that side is kind of up against the wall,so I haven't really scoped it out good.
Trent

Re: I need one of these

PDX
Sherwood Pick-N-Pull has a 64 on there lot know. The truck had alot of rust in it not sure about that part.

Re: I need one of these

you can buy them as repair panels
ron

Re: I need one of these

Quote:

Originally Posted by 63sbssbbw (Post 5111278)

I'm not in a big hurry. Let me know. Thanks

Quote:

Originally Posted by 66farmer (Post 5111451)

PDX
Sherwood Pick-N-Pull has a 64 on there lot know. The truck had alot of rust in it not sure about that part.

Thanks. I went to the 2 pick and pulls close to me and had no luck. The main problem with pick and pull is getting it off the truck. I don't think my cordless drill, even with both batteries, will last long enough to drill out all the spot welds and I don't have a cordless sawsall.

Quote:

Originally Posted by padresag (Post 5111570)

you can buy them as repair panels
ron

I've seen the lower portion patch panel but as you can see from the picture, mine is rusted out on the upper portion and more on the side you can't see in the picture. Thanks for the info, though.

Re: I need one of these

Bad thing about Pick-Pull is you can't take a cordless sawsall in the yard ... I was at the Sherwood Pick-N-Pull and saw the Red Truck in Reference , but was looking for other things so didn't notice condition of needed section ...

Re: I need one of these

I checked it out PD,it's in great shape
T

Re: I need one of these

Quote:

Originally Posted by 63sbssbbw (Post 5112386)

I checked it out PD,it's in great shape
T

I'm sending you a PM. Thanks.

Re: I need one of these

Quote:

Originally Posted by 62 Longbed (Post 5112208)

The guy I talked to at the north Columbia yard said that they did allow cordless sawsalls. Maybe different ones have different rules and then again maybe the guy didn't know what he was talking about. Anyway, it looks like Trent has me covered.

Re: I need one of these

Glad to hear your covered ... The Pick-Pull in Sherwood has a sign posted about the Tools not allowed ... Good Luck !!

Re: I need one of these

Quote:

Originally Posted by 62 Longbed (Post 5112827)

Glad to hear your covered ... The Pick-Pull in Sherwood has a sign posted about the Tools not allowed ... Good Luck !!

Thanks. This will be my first project welding on my truck. I've been practicing with my new mig and I figured a place that isn't going to show is a good place to start.

Re: I need one of these

Quote:

Originally Posted by pdxhall (Post 5112842)

Thanks. This will be my first project welding on my truck. I've been practicing with my new mig and I figured a place that isn't going to show is a good place to start.

.
Knowing this now PD,I'll try to get this done a little quicker than my PM suggested...:) T