67-72 frame specs...cab mounts
 

i was wondering if someone had the specs for cab mounts on the frame as well as motor mounts. i have seen dimension sheets on this form but have not seen the specs for the cab mounts

Re: 67-72 frame specs...cab mounts
 

are you referring to the locations of the cab mount holes with respect to both the length and width of the frame? I had to repair my brackets since they were so rusted out and was seeking the same information. I ended up measuring another frame and figured out everything as close as i could. What are you trying to do with these numbers?

Re: 67-72 frame specs...cab mounts
 

yeah that's what i'm lookin for. well i'm building my own frame from the ground up and i dont have a frame to measure from. my old ones all cut up and almost sure its not straight.

Re: 67-72 frame specs...cab mounts
 

Not sure if this helps but thought I would post it...

http://67-72chevytrucks.com/vboard/s...d.php?t=194004


http://67-72chevytrucks.com/vboard/s...d.php?t=406751


http://67-72chevytrucks.com/vboard/s...d.php?t=321874

Re: 67-72 frame specs...cab mounts
 

thanks 70cst but i need the frame specs and dimensions i have seen a few on this form but non show the cab mounts and motor mount specs on them.

Re: 67-72 frame specs...cab mounts
 

is this what you are looking for?

Re: 67-72 frame specs...cab mounts
 

Great info. I actually needed this :) Thanks!

Re: 67-72 frame specs...cab mounts
 

well i need most of this and this is the image i have seen before but it doesn't show measurements for the cab mounts just their location....

Re: 67-72 frame specs...cab mounts
 

bump.....

Re: 67-72 frame specs...cab mounts
 

Thank you for information! That's what I was looking for.