Geting ready for my next project on the 72!
 

I still have to gather up a few items and order a few parts. I am getting ready to replace my windshield wiper motor, replace wiper switch with a delay wiper switch, install a new windshield washer container out of a 87 truck, it has the pump mounted to it, new hose for the squirters, and new squirters. I am going to pull my dash out for this install, while it is out, I am going to upgrade my 4 bottom gauges to Autometer sport comp. gauges, I am going to install 0-100 oil pressure, tranny temp gauge, water temp gauge, and volt gauge 2 5/8' gauges, I am going to repaint the needle on my speedo, and gas gauge, and going to install a Auto meter sport comp tach in the center hole, between the speedo and gas gauge. And while I have the dash out, I am going to install my new tilt column. Any do's and don't before I get started with this? Any useful tips, good hints, good suggestions? Let me know!
Trying to cover all my bases before I get started!
Thanks
Sam

Check the F.A.Q.s at the top of the board on any of those topics- should be loads of info on what you're doing.:canada:

good luck sounds like a good project

And what it the projected completion date....?

Post pics as you go.........

Keep us posted!

I am ordering the gauges today! Have a couple more things to get for the windshield wiper upgrade. I will not be abl eto post picture yet. I don't have a digital camera just yet, but, I am getting ready to get one soon. I have checked the faq board and got the info from there.
Sam

I took a tank off a 86 K10. I really liked that upgrade! Hope all works well for ya. If you have any questions on it, please feel free to PM me, I will be more than happy to help. :)