250 I-6 engine parts
 

Got a whole bunch of 250 and 292 engine parts for sale. too much to list. pm me with what you need and i,ll pm you back with price. NO PAYPAL SORRY I,AM HIP TO THE PAYPAL SCAM ! ! ALSO I HAVE ALMOST 700 POSITIVE FEEDBACK ON EBAY WITH 0 NEGS. USPS M/O ( PREFERED ) OR CHECK IS FINE ( MST CLEAR BEFORE SHIPPING)
bob in tn.
1-423-384-8938
bcowanwheels@aol.com
N.O.S. 292 EXHAUST MANIFOLD 2 1/2"-- 3 BOLT OUTLET $325.00
GOOD IRON EXH. MANIFOLDS $125.00
CARBS, USED TAKE OFFS $45.00
INTAKE MANIFOLDS $45.00
ALT MOUNTS, TOP AND BOTTOM $ 65.00
EARLY NON INT.HEAD CORES, TAKE OFFS $200.00 - STRIPPED, HOT TANKED AND PRESSURE CHECKED & MAGNIFLUXED $ 265.00
VALVE COVERS $45.00 (NON SCRIPT)
T/O BALANCER $25.00
SET OF RODS $75.00
CRANK STD/STD (TAKE OUTS) $150.00
292 .040 PISTONS NICE USED $45.00
194 EXCELLENT ( CLOSED CHAMBER ) CYL HEAD, CLEANNED, PRESS CHECKED, MAG CHECKED $ 350.00
NEW OFFY 2 X 2 BBL INTAKE AND 2 NEW HOLLEY MODEL 1920 1BBL CARBS $700.00 SUPER NICE
EXCELLENT ORIGINAL 19K MILES ENGINE, COMPLETE TAKE OUT WITH 3 SPEED MANUEL TRANS ( CAN HEAR RUN AND DRIVE THE TRUCK $ 3850.00

PLUS TONS MORE ! 35 YR COLLECTION

Re: 250 I-6 engine parts
 

Bob, looking for a sound 250 (non-integral) exhaust manifold or header (stick shift).
Please post reply in thread with photo, price & shipping to 98168.

Thanks. ET

Re: 250 I-6 engine parts
 

Bob I as well am looking a good exhaust manifold post price shipped to 95242.

Re: 250 I-6 engine parts
 

pm sent

Re: 250 I-6 engine parts
 

Please list prices and parts ASAP, per forum rules. No PM sales are allowed. Thank you!

Re: 250 I-6 engine parts
 

Hey Bob, could you post a pic of the thermostat neck (the details we talked about). Just want to make sure its the right one. And I wont need the switch. Thanks. -John

Re: 250 I-6 engine parts
 

Thanks for the posts Bob!
I may have found one locally but will stay subscribed until I know more.

Re: 250 I-6 engine parts
 

Pic,s of the 19k 1970 250 i-6

Re: 250 I-6 engine parts
 

Bob, after seeing the pics, I'm gonna pass....was hoping for the "stock" tapped (drivers side) for the switch location. Thanks though.

-John

Re: 250 I-6 engine parts
 

Hey Bob how much for the two grove water pump pulley?
Posted via Mobile Device

Re: 250 I-6 engine parts
 

Bob, I borrowed this pic from a different thread.....it shows the thermostat neck with the switch on the drivers side. Most I've found, havent been drilled and tapped for it....and I'd rather find one thats already done than do it to the working one I already have.
Attachment 865317

Re: 250 I-6 engine parts
 

Hey Bob how much for a two grove water pump pulley?
Posted via Mobile Device

Re: 250 I-6 engine parts
 

Oh well thanks anyway
Posted via Mobile Device

Re: 250 I-6 engine parts
 

How much for the finger guard/fan shroud in the picture with the 1970 motor above? Also, Are the balancers pressed on or bolted on on these motors. Im putting one back together with my dad but were used to the SBC. Thanks!

Re: 250 I-6 engine parts
 

Looking for a exhaust manifold for my 70' 250 inline 6. 66048

Matt

Re: 250 I-6 engine parts
 

How much for the water inlet that bolts to the head shipped to 91335
Posted via Mobile Device

Re: 250 I-6 engine parts
 

I need a head for a 69 250. How much shipped to 77493?

Thanks
Darryl

Re: 250 I-6 engine parts
 

What would shipping be to Texas 77493?
Thanks
Darryl

Re: 250 I-6 engine parts
 

here is one of my heads i build. i also have virgin excellent 194 closed chamber heads but there pricey because there so hard to find now.

Re: 250 I-6 engine parts
 

Do you have the engine lifting brackets (front and back)?
Thanks...Dave

Re: 250 I-6 engine parts
 

Do you have a pic of the carb? Does the carb work?

Re: 250 I-6 engine parts
 

I need the tv cable brackets complete for my 250/th350 that works for the rochester "b" single barrel carburator. How much and shipping to california 92841

Re: 250 I-6 engine parts
 

No problem but thanks for responding back fast.

Re: 250 I-6 engine parts
 

Bob

Got the head today. I must say that was the best package I have ever seen on an auto part...even from commercial outfits. It truely was Fedex Proof!

Thanks
Darryl
Posted via Mobile Device

Re: 250 I-6 engine parts
 

I just recently bought a 250 engine and it happens to have a 194 head on it already. I was wondering about getting a hopped up version though. what are your prices for upgrades? what do you have? Should I keep the 194 head or get the 250 version? I want to get right 250 horsepower out of this motor if I can without boost and still have good driveability and vacuum. and I may or may not do a turbo setup later.

Here's what I have:
Do have parts for it still? I was looking for a power steering setup and maybe a high performance intake setup? thanks