Power brake question
 

I bought a booster the other day from a 65 3/4 ton that had power brakes. I have the vacuum booster abd the power brake rod and set up that goes into the booster from the inside of the cab into the booster when it is mounted ont eh firewall. My question is, if I change the rod out on my 66 on the brake pedal and install the booster to the firewall with the vacuum hookup, is that all i have to do? I know I have to bolt my master cylinder to it too. I do apologize in advance if this is confusing haha

Re: Power brake question
 

That should be it, as long as your master cylinder will work with the booster.

Re: Power brake question
 

That's all I had to do.