The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - 76 k10 cluster (https://67-72chevytrucks.com/vboard/showthread.php?t=507580)

Chreees

02-06-2012 07:51 PM

76 k10 cluster

How much would it be for an all new working gas gauge or a whole new cluster for my truck I am afraid mine is broken or the sensor?

Edit: I am thinking its the sensor for the left tank that is out. Is it easier to replace the pumps and the tanks?

76stepsidechevy

02-06-2012 08:21 PM

Re: 76 k10 cluster

The pump should be on the block for your 76. Just a sending unit in the tank. Does the guage peg to full when switched to that side or ?

Chreees

02-06-2012 08:29 PM

Re: 76 k10 cluster

Quote:

Originally Posted by 76stepsidechevy (Post 5170994)

The pump should be on the block for your 76. Just a sending unit in the tank. Does the guage peg to full when switched to that side or ?

On the right tank it is accurate while on the left side its the same every time... :waah:

76stepsidechevy

02-06-2012 09:07 PM

Re: 76 k10 cluster

Well that eliminates the gauge and the wiring from the tank selector switch to the gauge. The issue is either in the tank selector switch, the sending unit in that tank, or the wiring between the tank and the switch. I"d crawl under there and check out the wiring going to that tank first.

Chreees

02-06-2012 09:32 PM

Re: 76 k10 cluster

Quote:

Originally Posted by 76stepsidechevy (Post 5171102)

Thanks will do tomorrow when its not so cold :S

All times are GMT -4. The time now is 03:25 AM.