The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Bed tank filler hose (https://67-72chevytrucks.com/vboard/showthread.php?t=50770)

Linus0014 04-29-2003 07:35 PM

Bed tank filler hose
 
Does anyone know where to get filler hose for gas tank that was converted to under the bed?

krue 04-29-2003 08:19 PM

Try a place that deals or services boats. They should have what you need.

72MARIO 04-29-2003 08:27 PM

Get the measurements when you measure the bends go from center to center. Take them to a muffler shop and have the guy bend it up out of 1 1/2". Then go to a NAPA and get 1 1/4 hose (expensive) and use that to connect the tank to the pipe.(yes it will fit over with a bit of streching.

Later

Linus0014 04-29-2003 09:42 PM

Thanks, good ideas.

Mudder 04-29-2003 11:05 PM

Parts stores here sell the hose but it pretty expensive.Sold by the inch. :)

Classic Heartbeat 04-30-2003 01:43 AM

Wish we were so lucky as to have the 1 1/4" hose so easy to find. I searched for a long time to find a supplyer! I found it and now stock it. I usually have 20' in stock. I also sell it by the foot. WES www.ClassicHeartbeat.com

krazy_texan 04-30-2003 04:28 AM

salvage yard get one out of another truck i thought about pulling the one out of my 87 that i parted but never got around to it


All times are GMT -4. The time now is 10:49 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com