The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   BB W/ TH400 tailshaft length? (https://67-72chevytrucks.com/vboard/showthread.php?t=508107)

MadnessBigBlock 02-09-2012 05:52 PM
BB W/ TH400 tailshaft length?
 
What is the factory TH400 tailshaft length that would of been behind a big block in 68-72 trucks (I assume 68-72 used the same tailshaft length but correct me if im wrong)

hugger6933 02-09-2012 10:50 PM
Re: BB W/ TH400 tailshaft length?
 
I think it was the "short" shaft if I get time I'll look under mine. Is'nt the short shaft like 4-6 inches?

MadnessBigBlock 02-10-2012 07:20 PM
Re: BB W/ TH400 tailshaft length?
 
Thanks if you get time please measure it and let me know thanks again Brett!
Posted via Mobile Device

MadnessBigBlock 02-21-2013 08:14 PM
Re: BB W/ TH400 tailshaft length?
 
any able to measure this for me? thanks, brett.

brad_man_72 02-21-2013 10:28 PM
Re: BB W/ TH400 tailshaft length?
 
If its the short shaft the trans yoke will be 5.5" center of joint to end with a .5" counterbore.
Posted via Mobile Device

MadnessBigBlock 03-10-2013 08:55 PM
Re: BB W/ TH400 tailshaft length?
 
Anyone know the factory tailshaft length on th400 with big block in front?
Posted via Mobile Device


All times are GMT -4. The time now is 11:07 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com