new to site with bagged 84 c10
 

Wanted to put some pics of my 84 c10 up on here for everyone to check out and such. There are some really clean and well built trucks on here but mines a complete work in progress. I just ordered some boss 338's in 20's with the gray middle for it. I already did the research on this site for a few months about it and I ended up having the LD rotors on my truck so even better for fitment issues with them. Now on to the truck itself:

SUSPENSION:
bagged with a 2 link rear (definitely getting changed)
chrome lower air ride tech arms up front and stock uppers
firestone bags all the way around
3/8" lines
viair 380 (need another or a bigger one)
chassis tech polished 5 gallon tank in bed
z'd frame
belltech 2" drop spindles

DRIVETRAIN:
350 4 bolt main bored .030 over
289 cam (not sure on brand the motor was in the truck when i got it)
eldebrock 450cfm carb
holly roller rockers ( i think thats what they are)
turbo 400 tranny
3200 stall
stock rear

INTERIOR:
custom rolled sheet metal dash with autometer gauges and leather top
custom center console
Alpine IVA-W505 6.5" in dash screen
kicker 5.25's in both doors
4 kicker cvr 8's behind the seat
kicker 200.4 for highs, kicker 750/1 for subs
all interior minus carpet right now until i get all my wiring situated for everything
billet specialties leather wrapped billet wheel

EXTERIOR:
shaved tailgate with SIR MICHAELS skin
shaved bed pockets
no molding on truck
some ugly wheels (boss 338's are coming)
phantom billet grill across front
molded roll pan
shaved drip edges ( i believe they were atleast, seems like i thought 84's had them on there)


I think thats about it on that truck. Im sure im missing a few thins but on to the pics:

interior before i did the console:

http://i673.photobucket.com/albums/v...8/362ae412.jpg

after the console:

http://i673.photobucket.com/albums/v...8/30d1ec06.jpg

http://i673.photobucket.com/albums/v...8/b6fcf56b.jpg

http://i673.photobucket.com/albums/v...8/ff59a817.jpg

door speakers:

http://i673.photobucket.com/albums/v...8/b84b396d.jpg

the truck:

http://i673.photobucket.com/albums/v...8/1a3d5d5a.jpg

http://i673.photobucket.com/albums/v...8/19950463.jpg

thinking of changing the taillights out to the new stock lenses I have for it

http://i673.photobucket.com/albums/v...8/b9353277.jpg

http://i673.photobucket.com/albums/v...la2008/002.jpg

best motor shot I have:

http://i673.photobucket.com/albums/v...la2008/005.jpg


sound clip of it idling:

http://i673.photobucket.com/albums/v...h_ed1c7962.jpg

closers pics of the radio in it:

Its a little crooked but its getting redone when my fabric comes in:

after I cut out the hole:

http://i673.photobucket.com/albums/v...8/b718970d.jpg

with cage:

http://i673.photobucket.com/albums/v...8/494e26a3.jpg

tv in:

http://i673.photobucket.com/albums/v...8/1dad53c6.jpg

playing:

http://i673.photobucket.com/albums/v...8/4a3914d3.jpg

Re: new to site with bagged 84 c10
 

great lookin project! Kinda interesting seeing a center console formed to a bench seat, post pics when you get it covered!

Re: new to site with bagged 84 c10
 

Thanks! I was iffy on it while building it because I wasnt sure how it would go with the truck but it came out better than I had originally thought. I have to get some foam for the top and some thicker foam as im "raising" C10 on the armrest section of it just for looks. Im undecided on colors. I thought about just doing a red leather on it like the dash but I think it would look weird with a red top, black middle then a red console. The gap of no red to the top might bother me but then again it may look good lol. If i dont do that im just doing a black leather or might swap out the red for red crocodile on the top of the dash and steering wheel and black crocodile on the console

Re: new to site with bagged 84 c10
 

welcome& i like that idea of tha console coming over tha seat..i thought it had buckets @ first..

Re: new to site with bagged 84 c10
 

I want some bucket seats for it but my bench seat is really comfortable so i hate to change it lol. Thats the reason I went over the top with it since I wanted arm rest in the middle also.

Re: new to site with bagged 84 c10
 

what did you use to top it...i can't tell tha sides are MDF..

Re: new to site with bagged 84 c10
 

Your right about the sides. They are 3/4" mdf I had left over from building sub boxes. The top is some type of paneling board. I got it from home depot for around $7 a 24x48 sheet
Posted via Mobile Device

Re: new to site with bagged 84 c10
 

Nice truck looks good man . Welcome from North LA

Re: new to site with bagged 84 c10
 

Hey welcome to the best boards around from MT. Sweet looking ride. Like your center console setup as well looks right at home in there.

Re: new to site with bagged 84 c10
 

nice, very nice:metal:

Re: new to site with bagged 84 c10
 

man welcome to the site....that is a bad truck you have....really like the phantom grill and the flat black look...i know you are new to site but im looking forward to seeing a build thread for progress...did you start one?

Re: new to site with bagged 84 c10
 

dude, i think the console would look sweet fiberglassed and painted gloss black with some old school red and white pinstripes... and maybe throw in some curves with the raised c10 logo painted in red also. maybe fiberglass the dash top also to tie it together?...just my thoughts, im sure youve already thought about that...the truck is sweet

Re: new to site with bagged 84 c10
 

sweet truck I like the dash alot. I also have a bagged 84!

Re: new to site with bagged 84 c10
 

oh yea...i think i used some of that to top a table i made..

Re: new to site with bagged 84 c10
 

I havent made one but I will when the wheels come in. Im anxious to get them on and give the truck a new look besides those ugly steam rollers on it

A lot has crossed my mind on what to do with it. My main thing id like to do is when I get true bucket seats is redo it and cover it with sheet metal, weld it and smooth it to the dash then repaint the dash and all the final flat/satin black or go gloss black on the inside with some red pinstriping covering it, still undecided on that one

thanks I appreciate it. The console was a fun little project for it. It still needs to be fine tuned but will be before show season starts down here.

Thanks man, glad to see a fellow louisiana person on the boards

Re: new to site with bagged 84 c10
 

Thanks for the compliment! Got any pics of your 84? id love to see it!

Re: new to site with bagged 84 c10
 

yeah, you're right, sheetmetal would be the way to go!