![]() |
68 kick panels and rear enclosure
Decided I'd finally do some kick panels and a rear enclosure for my truck
http://i1183.photobucket.com/albums/...9/eb5399cf.jpg http://i1183.photobucket.com/albums/...9/f79605ec.jpg http://i1183.photobucket.com/albums/...9/85c6cebf.jpg Posted via Mobile Device |
Re: 68 kick panels and rear enclosure
|
Re: 68 kick panels and rear enclosure
|
Re: 68 kick panels and rear enclosure
http://i1183.photobucket.com/albums/...9/0f370e23.jpg
Kick panels will be color matched & the enclosure will be wrapped in the same color/material as my bench seat ... Thanks Posted via Mobile Device |
Re: 68 kick panels and rear enclosure
Looks great! A single 8" sub would go well in the middle of that rear one but looks great!
|
Re: 68 kick panels and rear enclosure
looks great! How is that rear enclosure going to attach to the cab?
|
Re: 68 kick panels and rear enclosure
Nicely done!
|
Re: 68 kick panels and rear enclosure
Looks really good, I did the same thing with my kick panels. They turned out great and sounds good too. My sub behind the seat is a little different, built an enclosure out of MDF board and installed a 12" low profile sub. Where are you putting your amp/s?
Posted via Mobile Device |
Re: 68 kick panels and rear enclosure
looks good...
|
Re: 68 kick panels and rear enclosure
Placing my amps under my seat ... For the 1st time ever I didn't want to run subs in my vehicle.. Just something nice and simple so I can listen to some music
http://i1183.photobucket.com/albums/...9/0b9168fd.jpg Posted via Mobile Device |
Re: 68 kick panels and rear enclosure
Looks good, nice to see some bare bones type pictures as I'm about to do something similar. Focal component kicks and a rear enclosure with a JL W3 10" in the middle. I'm thinking amps/crossovers/distribution blocks behind the seat on one side and small storage type compartment behind the other.
That last pic is pretty grainy, is it covered with a material or painted? |
Re: 68 kick panels and rear enclosure
It's covered in a blue suede
Posted via Mobile Device |
Re: 68 kick panels and rear enclosure
Looks great! What material did you use for the back of the kicks?
|
Re: 68 kick panels and rear enclosure
Hi new here, that rear panel is what I need to do for my 90 s10! Do you have a build thread? Or what material did you use?
|
Re: 68 kick panels and rear enclosure
No I don't have a build thread.. I just used mdf board and fiberglass and a Lil body filler ... I'll try and get a pic of the back once I wire it up.. I just have it sitting in the truck right now
Posted via Mobile Device |
Re: 68 kick panels and rear enclosure
http://i1183.photobucket.com/albums/...9/c1d5713d.jpg
Hopefully I should paint these on Sunday .. I've been working on my garage lately but gonna jump back on these Posted via Mobile Device |
Re: 68 kick panels and rear enclosure
Nice!
|
Re: 68 kick panels and rear enclosure
Great Job man! Looks nice
|
Re: 68 kick panels and rear enclosure
http://i1183.photobucket.com/albums/...9/734b37de.jpg
Color matched to the truck.. Next week I'll install another amp Posted via Mobile Device |
Re: 68 kick panels and rear enclosure
Looks great! Also wondering how the rear panel attaches.
Posted via Mobile Device |
Re: 68 kick panels and rear enclosure
Very nice job!! Are you a member on a fiberglass fabrication forum? I thought I saw where you had a build thread?
|
Re: 68 kick panels and rear enclosure
Quote:
The enclosed sits in the corners and is made to a tight fit.. I don't wanna bolt it in or make it a permanent setup... I haven't had any problems with it moving at all Posted via Mobile Device |
Re: 68 kick panels and rear enclosure
http://i1183.photobucket.com/albums/...9/d4647d33.jpg
Posted via Mobile Device |
Re: 68 kick panels and rear enclosure
Look awesome! Nice work.
|
Re: 68 kick panels and rear enclosure
Very nice!!
|
All times are GMT -4. The time now is 02:39 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com