The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 99-06 GMT800 Chevy and GMC Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=58)

- - Engine Hours (https://67-72chevytrucks.com/vboard/showthread.php?t=510516)

Mobilehomie

02-22-2012 07:41 PM

Engine Hours

Somehow the engine hours display got reset on my '06 GMC Yukon XL Denali. Is there any way to recover that? Not sure what happened, got into it one day and the engine hours was at like 2.5 when it was showing over four thousand....

clinebarger

02-22-2012 09:34 PM

Re: Engine Hours

Quote:

Originally Posted by Mobilehomie (Post 5206060)

Its common, No way to recover the hours....Short of reprogramming the cluster That WILL act-up again, With whatever hours you "think" were on it.

03-06 & 07 Classic Clusters are JUNK. I know my 06 has reset, 2,500 engine hours with over 200,000 miles.

gerry lecky

02-26-2012 01:36 PM

Re: Engine Hours

my 05 gmc resets all the time. i have 260000 kms and curenty 235 hrs. has been a problem for years so i just do not worry about it

Mobilehomie

02-27-2012 07:08 PM

Re: Engine Hours

Thanks for the replies guys!

Got another question about a no start condition that has happened twice now. Twist the key and hear a click at the solenoid. Prolly start another thread...

clinebarger

02-27-2012 07:41 PM

Re: Engine Hours

Quote:

Originally Posted by Mobilehomie (Post 5216682)

Thanks for the replies guys!

Got another question about a no start condition that has happened twice now. Twist the key and hear a click at the solenoid. Prolly start another thread...

Check the battery cable terminals for corrosion & Make sure they are tight.
The bolts & rubber sleeves need to be removed from the battery cables to be cleaned.

All times are GMT -4. The time now is 09:25 PM.