project pacific wonder
 

I first bought my 1970 1/2 ton 2wd suburban about 8 years ago. We finally decided to restore...sort of.

Re: project pacific wonder
 

here is some of the stripping process before body and paint work
the worst of the rust was a little on the passenger side floor board and some rust inside the hatch.

Re: project pacific wonder
 

i pulled the frame out and replaced it with a 3/4 ton 4x4 frame from this white 1972 burb

its amazing what some wood, 2 bottle jacks and a floor jack can accomplish

Re: project pacific wonder
 

i stuck with stock height suspension and added a front sway bar from an 87 blazer as well as the hydroboost PS system, and picked up a discounted rear sway bar from schwabs

3 leaf front 6 leaf rear

Re: project pacific wonder
 

i needed 373 gears and found a front 10 bolt from an 87 burb and rear 14 bolt from a 93 burb
i had to moved the rear spring perch slightly but the front lined up perfect

picked up some all steel wheels from wheel vintiques and schwabs M54 radial HT
235/85/16

Re: project pacific wonder
 

put the white 72 burb on my old frame and its now my daily driver

Re: project pacific wonder
 

the old dash was full of hole so we found another along with the large hump trans cover

Re: project pacific wonder
 

i actually wanted hugger orange but recieved some bad information and ended up with the factory orange (tangier) instead. i like it but it is a little but more of a show color.

we also kept the original wood bed, it was in amazing shape

Re: project pacific wonder
 

last days in the paint booth

Re: project pacific wonder
 

home for some interior work and door assy

tilt column, you can see the color difference on the steering wheel
sound deadener showdown goes in nicely and i i wish i would have known the ac unit would block the kick vent and eliminate your glove box

Re: project pacific wonder
 

nice work! love them burbs
Posted via Mobile Device

Re: project pacific wonder
 

off to the diesel shop for my custom spec dodge 47rh auto and NOS cummins 4bt

I added clearance lights and will eventually have dual spot lights

Re: project pacific wonder
 

we went crazy with insulation and sound deadening for fear of diesel noise and vibration

original rear interior quarters changed black then grey with rattle can dye
custom auto sound

gas strut conversion on the rear hatch

Re: project pacific wonder
 

does anyone know where to get the push in clips for the delux trim rail on the hatch? it is just sitting in place right now

also have a rear heat unit i will hide in the back so i have room for my camping pads

Re: project pacific wonder
 

still having trouble aligning the hatch

Re: project pacific wonder
 

used american auto wire harness and cant wait to install the grounding kit

Re: project pacific wonder
 

Hey thanks alot it has been almost a year in the works, 18 months or more if you count active planning

Re: project pacific wonder
 

very cool.. Do u plan on doing any hard 4 wheel driving?

Re: project pacific wonder
 

im not against it, this will be my daily driver and i will be happy to get a few scdratches

Re: project pacific wonder
 

Subscribed! This thing is beautiful!

Re: project pacific wonder
 

Wow! Cool build. Cant wait to see the finished product with the 4bt Cummins. Gotta love those Pacific Wonderland plates.

Re: project pacific wonder
 

Great looking burb here...it reminds me alot of the owner of Groit's Garage burb he did....http://www.griotsgarage.com/text/con...aoccHB296.html

Re: project pacific wonder
 

That's kinda funny. I was going for his color but he put the wrong paint description in his blog he said it was original tangier but his is actually hugged (red orange) but I love both colors
Posted via Mobile Device

Re: project pacific wonder
 

That thing is also pretty nice, I think I'll post those pics in the Burb pic section..

Re: project pacific wonder
 

Does anyone know where to get the push clips for the hatch trim?
Posted via Mobile Device