The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Power steering pulley (https://67-72chevytrucks.com/vboard/showthread.php?t=511857)

BB72CHEVKT

03-01-2012 11:30 AM

Power steering pulley

I got the pulley back from the powder coater and it does not want to go back on. I realize it maybe due to the powdercoating but thought it might have to be pressed on????

red69ss

03-01-2012 02:41 PM

Re: Power steering pulley

all the ones I've pulled went right back on no pressing required, if it has powder coating inside were the shaft goes that is probaly the issue.

BB72CHEVKT

03-01-2012 02:52 PM

Re: Power steering pulley

Quote:

Originally Posted by red69ss (Post 5223108)

all the ones I've pulled went right back on no pressing required, if it has powder coating inside were the shaft goes that is probaly the issue.

Thanks. It was kind of hard to get off so I thought they might be pressed on. I will sand down some of the powder coat and should do the trick.

All times are GMT -4. The time now is 12:35 PM.