The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Aftermarket Sheet metal panel question (https://67-72chevytrucks.com/vboard/showthread.php?t=512347)

Summabish

03-03-2012 09:11 PM

Aftermarket Sheet metal panel question

I'm looking for patch panels for the front of my fenders on my 66, I'm almost positive there was a company that use to make/sell them, That is the only part of my fenders that shows any rot and I'd rather not buy new ones when I could repair these if there was a patch panel. So hopefully someone can guide me in the right direction. Thanks in advance.

rideblue00

03-03-2012 09:28 PM

Re: Aftermarket Sheet metal panel question

I will assume you are refering to the "cup" part. They are not made. There is a patch for the front section, but no cup. LMC has patches, as well as Classic Parts Of America.

Summabish

03-03-2012 09:29 PM

Re: Aftermarket Sheet metal panel question

Quote:

Originally Posted by rideblue00 (Post 5228152)

I will assume you are refering to the "cup" part. They are not made. There is a patch for the front section, but no cup. LMC has patches, as well as Classic Parts Of America.

Yea the bottom of the front below the cup area, over the years of its life, rain has cause some rot.

rideblue00

03-03-2012 09:31 PM

Re: Aftermarket Sheet metal panel question

Ok, look up those 2 sites.

Summabish

03-03-2012 09:36 PM

Re: Aftermarket Sheet metal panel question

Quote:

Originally Posted by rideblue00 (Post 5228162)

Ok, look up those 2 sites.

Well I knew LMC didn't list them, but I found exactly what I was looking for on Classic Parts. Thanks for the info.

All times are GMT -4. The time now is 11:53 AM.