![]() |
Rotor replace
Trying to replace my front rotors but the hub wont split from the rotor any thoughts on ways trying to spilt them??
Thanks Posted via Mobile Device |
Re: Rotor replace
Need to press all the wheel studs out first.
|
Re: Rotor replace
Get a brass hammer and beat the studs out if you dont have access to a press. The rotor should fall right off then, if not give it a tap with the hammer.
|
Re: Rotor replace
Yup, need to remove wheel studs to get the two pieces to separate.
However, you can but rotors that have the hub 'carrier' attached already if you prefer. I do think it costs more to do it that way, and my local parts source did not have those on-hand, but could order them. I ended up replacing rotors and re-installing my hub carrier. |
| All times are GMT -4. The time now is 07:36 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com