'64 Drop member install Trans Hump
 

:fb:Does anyone know if replacing the low trans hump with the tall trans hump necessary with a PB dropmember. Almost every post I see has the hump replaced with the tall hump?

Re: '64 Drop member install Trans Hump
 

the hump is not from using a dropmember it more from running an auto tranny not alot of room in there for auto especially an OD.

Re: '64 Drop member install Trans Hump
 

I think the DM moves the engine up a couple of inches, which is why it works better with a high hump

Re: '64 Drop member install Trans Hump
 

Tis True...

If running a big block even the high hump isnt enough.

Re: '64 Drop member install Trans Hump
 

So where is the best place to find a tall hump. I assume these are taken from 4x4'? I have looked and I can not find any one making these as a replacement. Thanks

Re: '64 Drop member install Trans Hump
 

They came on 4x4's but they came on any 2wd with a 4 speed tranny. I have 3 2wd's in my driveway they all have the bolt in high hump. So look in junk yards for the 4 speed version. The hump bolts in, but you also need to drill out the spot welds for the front portion the hump bolts to! Good luck.
Tony from Norcal
Posted via Mobile Device

Re: '64 Drop member install Trans Hump
 

I am also looking for the high hump if anyone knows where to find one let me know plz.

My 64 has a 4 speed but wouldn't know if it was in there before or not, the truck is in shipping and i haven't seen it in person yet so cant check.

Would the vin tell you what gearbox i had?

Re: '64 Drop member install Trans Hump
 

Thanks 64 shortc10 for the help. I am searching..:metal:

Re: '64 Drop member install Trans Hump
 

arizona parts steve almeter helped me and got me both pieces 585-314-7907 let him know dave from ny with the suburban sent you he may be able to get you what you need he kind of specializes in these trucks.