The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Frame Holes? (https://67-72chevytrucks.com/vboard/showthread.php?t=518749)

sighlurr

04-09-2012 07:06 PM

Frame Holes?

1 Attachment(s)

I'm in the process of cleaning up my longbed frame, but don't want to create more work for myself later on.

Can anyone identify these holes towards the end of my frame? This truck hasn't had a bumper for many years, and I know 2 are for the mounts. But what about the remaining holes?

Thanks!
Posted via Mobile Device

FRENCHBLUE72

04-09-2012 08:36 PM

Re: Frame Holes?

Not sure what those holes were for but I welded mine up.. One the big hole I ran a piece of tube between the fram rails to run the wiring through..

sighlurr

04-09-2012 08:46 PM

Re: Frame Holes?

Ok, thanks. Can you confirm that the hole that is the most forward, and the one at the very rear are for the bumper brackets?

Quote:

Originally Posted by FRENCHBLUE72 (Post 5303617)

Not sure what those holes were for but I welded mine up.. One the big hole I ran a piece of tube between the fram rails to run the wiring through..

Posted via Mobile Device

sighlurr

04-09-2012 10:44 PM

Re: Frame Holes?

3 Attachment(s)

Found these pics from another post.

You can see the Mickey Mouse face set of holes not being used. Anyone know what these would be used for?

dennislbrooks

04-11-2012 12:27 PM

Re: Frame Holes?

I looked clear thru my build book and I cannot find what those holes are used for. My 67 swb does not have the holes but I have a 69 k10 lwb frame that does. i need to know.....

sighlurr

04-13-2012 09:42 PM

Re: Frame Holes?

Well, they're welded up now. Whatever they were for...

All times are GMT -4. The time now is 06:59 AM.