The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Newbee with some questions (https://67-72chevytrucks.com/vboard/showthread.php?t=521754)

Rusty one 04-26-2012 11:31 PM

Newbee with some questions
 
Getting ready to buy a 63 C-10 short bed.First time owner of these trucks..:o Not sure why these trucks are named different (fleetside,stepside). It already has been lowered front & rear and it has a disc brake 6 lug set up with new brake lines & hoses. My question is...I noticed some rot under one of the doors,I know no one makes replacement doors (except the skin) Id like to swap the door for a good used one....Is 63 the only year that will fit,or will other years fit too?..:dum:

big_rig 04-27-2012 12:31 AM

Re: Newbee with some questions
 
I believe 63-66 should be the same. LMC truck has a LOT of parts for these trucks. You could build one from scratch from their catalog. Their prices seem to have gone up lately shipping up here to Canada but its always nice working with new parts if your budget allows.
Posted via Mobile Device

Rusty one 04-27-2012 12:41 AM

Re: Newbee with some questions
 
Quote:

Originally Posted by big_rig (Post 5338704)
I believe 63-66 should be the same. LMC truck has a LOT of parts for these trucks. You could build one from scratch from their catalog. Their prices seem to have gone up lately shipping up here to Canada but its always nice working with new parts if your budget allows.
Posted via Mobile Device

Thanks for the reply..I'll check em out

Captainfab 04-27-2012 12:56 AM

Re: Newbee with some questions
 
Welcome to the forum :D

The '60-'63 doors are interchangeable. If all you have is a small rust issue, I would just fix the door you have. There are some patch panels available for reapiring rusted doors. There are several vendors that have those, such as Mikes Bump and Grind, Top Banana Parts, Classic Parts, just to name a few. The chances of finding a better door are slim these days.

losthope 04-27-2012 01:08 AM

Re: Newbee with some questions
 
Quote:

Originally Posted by Rusty one (Post 5338615)
:o Not sure why these trucks are named different (fleetside,stepside).

if you look at different members trucks you'll notice some beds have steps on the sides with a smaller box....these are called "stepside"

the ones that are just a reg. bed are called "fleetside"

Rusty one 04-27-2012 01:48 AM

Re: Newbee with some questions
 
Quote:

Originally Posted by losthope (Post 5338765)
if you look at different members trucks you'll notice some beds have steps on the sides with a smaller box....these are called "stepside"

the ones that are just a reg. bed are called "fleetside"

OK that clears that up thankyou...Can I ask....is it possible to put a step side bed on a fleetside truck? Is it a bolt up process?

Rusty one 04-27-2012 01:51 AM

Re: Newbee with some questions
 
Quote:

Originally Posted by Captainfab (Post 5338748)
Welcome to the forum :D

The '60-'63 doors are interchangeable. If all you have is a small rust issue, I would just fix the door you have. There are some patch panels available for reapiring rusted doors. There are several vendors that have those, such as Mikes Bump and Grind, Top Banana Parts, Classic Parts, just to name a few. The chances of finding a better door are slim these days.

Thankyou Capt...will be getting to you somewhere in the near future for your power steering plate...Will check out those vendors for patch panels...guess it would be cheaper & easier..........time to break out the welder!

koda360 04-27-2012 08:26 AM

Re: Newbee with some questions
 
Quote:

Originally Posted by Rusty one (Post 5338797)
OK that clears that up thankyou...Can I ask....is it possible to put a step side bed on a fleetside truck? Is it a bolt up process?

May not be a direct "bolt on" but swapping a fleet bed for a step, or visa versa is pretty straight forward. Main thing you gotta know is if its a short bed or long bed.....

1963c-10 04-27-2012 11:34 AM

Re: Newbee with some questions
 
Quote:

Originally Posted by Rusty one (Post 5338728)
Thanks for the reply..I'll check em out

I have to disagree with this. You cannot build a 60-66 from a parts catalog. Especially if your using Chinese reproduction parts that will not match up. Your best bet is to go OEM or NOS. Hit the scrap yards and craigslist up for parts. There are a ton of old parts out there for a margin of the cost of reproduction and the fitment issues are not there. The chinese reproductions are very poor quality and you will find alot of problems with alot of the parts. There are plenty of threads here to support this. The parts are overpriced and under quality. Sometimes they are your only option for some things. I would only suggest going to the catalogs for parts that are not obtainable or parts that are generic...ie...wiring, bed wood, etc...Do some research on what your looking for, hit up the classifieds. You will find alot of people only resort to the catalogs as a last resort. Also...60-63 cabs/doors are interchangeable and 64-66 cabs/doors are interchangeable.

Rusty one 04-27-2012 03:41 PM

Re: Newbee with some questions
 
Quote:

Originally Posted by 1963c-10 (Post 5339184)
I have to disagree with this. You cannot build a 60-66 from a parts catalog. Especially if your using Chinese reproduction parts that will not match up. Your best bet is to go OEM or NOS. Hit the scrap yards and craigslist up for parts. There are a ton of old parts out there for a margin of the cost of reproduction and the fitment issues are not there. The chinese reproductions are very poor quality and you will find alot of problems with alot of the parts. There are plenty of threads here to support this. The parts are overpriced and under quality. Sometimes they are your only option for some things. I would only suggest going to the catalogs for parts that are not obtainable or parts that are generic...ie...wiring, bed wood, etc...Do some research on what your looking for, hit up the classifieds. You will find alot of people only resort to the catalogs as a last resort. Also...60-63 cabs/doors are interchangeable and 64-66 cabs/doors are interchangeable.

Thankyou for the info.. If any one knows where I can find some rust free doors (60-63) please let me know...Thanks
Posted via Mobile Device

aerotruk63 04-27-2012 04:48 PM

Re: Newbee with some questions
 
This guy north of you has alot of trucks perhaps you could call him. LINK
http://67-72chevytrucks.com/vboard/s...hlight=picture

Rusty one 04-27-2012 09:24 PM

Re: Newbee with some questions
 
Quote:

Originally Posted by aerotruk63 (Post 5339640)
This guy north of you has alot of trucks perhaps you could call him. LINK
http://67-72chevytrucks.com/vboard/s...hlight=picture

WOW....Thanks will check him out..It's a ride but I'm sure I'll be like a kid in a candy store..:lol:


All times are GMT -4. The time now is 11:53 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com